The SuperATV 4" GDP Portal Gear Lift for the 2022+ Polaris RZR Pro R or RZR Pro R 4 lifts the machine 4 inches at the hubs and adds a 15% or 30% gear reduction. Choose cast aluminum or billet aluminum housings and single or dual idler gearing to match how you ride. The gear reduction in each hub relieves stress on your drivetrain, so you can run bigger tires without overworking axles and the transmission.
If you are shopping for rzr pro r portals, this SuperATV GDP portal kit is built for the Polaris RZR Pro R models listed below. It is also the right match if you searched for pro r portals.
Pair it with the Polaris RZR Pro R Rear Differential Frame Stiffener, sold separately.
Key Features
- Available with billet or cast aluminum housing
- Dual idler gear configuration maximizes strength
- Cool, quiet, precision-ground gears made from 9310 alloy billet steel
- 1.5 in. diameter 4340 hardened steel drive shaft
- Housings use gaskets or O-rings that don't let anything through
- Universal hub fits all major bolt patterns
- Gear reduction reduces stress on your drivetrain
- Dual idler gear configuration adds a 3/4" front and rear offset - 1.5" total extension
- Limited lifetime warranty from the manufacturer
Built To Solve: RZR Pro R Clearance And Big-Tire Problems
- Not enough ground clearance for rocks, ruts and ledges
- Bigger tires that bog the machine down
- Extra strain on axles, differential and transmission from oversized tires
Best For: Polaris RZR Pro R Owners
- Polaris RZR Pro R owners (2022+) stepping up to bigger tires
- Mud, rock and trail riders who want more clearance and low-end torque
- Owners who want billet housings and dual idlers for the hardest use
Specifications
- Lift: 4 inches at the hubs
- Gear reduction options: 15%, 30%
- Housing options: cast aluminum, billet aluminum
- Idler options: single, dual
- Wheel requirements (per the manufacturer): 15" or larger wheel required; 15" wheels cannot exceed 4-1/2" backspacing; 20" and larger wheels cannot exceed 5" backspacing; 1.25" wheel spacer must be used with stock wheels
- Warranty: Limited Lifetime warranty from the manufacturer against manufacturing defects to the original purchaser
- Included (per the manufacturer): (4) Assembled portal hub boxes complete w/ 9310 gears, seals, output shaft, gaskets, and thrust bearings; (4) Universal hubs and precision-ground stainless steel slotted rotors w/ lugs; (4) Specialized steel alloy backing plates; (4) Steel caliper mounting plates with spacers; (2) Steel steering arms; Extended brake lines with parking brake and brake cable brackets; All required hardware including recessed castle nut socket. A frame stiffener is not included. Anything not listed here is not included.
- Installation instructions: PGH-1-85-301 (PDF), PGHD-1-85-301 (PDF)
Tire Size Guide
Per the manufacturer, measured at full compression and full turn:
- 38": Stock
- 42": 1.5" Forward Offset A-Arms
Fitment
- Polaris RZR Pro R (2022+)
- Polaris RZR Pro R 4 (2022+)
The manufacturer lists these applications by model and year. Fitment is not guaranteed on models or years not listed above; confirm your exact model before ordering.
FAQ
Which machines does this fit?
The Polaris RZR Pro R models and years listed in the fitment section above (2022+). Confirm your exact model before ordering.
Which gear reduction should I choose?
Higher reductions (30%) add the most low-end torque for big tires, mud and rocks. Lower reductions (15%) keep more of your top speed. The tire size guide on this page lists the manufacturer recommendations.
What tire size can I run?
The manufacturer lists tire sizes by suspension setup in the tire size guide above. The largest size listed is 42" with 1.5" Forward Offset A-Arms.
What wheels do I need?
15" or larger wheel required; 15" wheels cannot exceed 4-1/2" backspacing; 20" and larger wheels cannot exceed 5" backspacing; 1.25" wheel spacer must be used with stock wheels.
What is the difference between single and dual idler gears?
Dual idler portals add a second idler gear in each portal box for maximum strength, per the manufacturer. Single idler is the lower-cost option. Dual idler gear configuration adds a 3/4" front and rear offset - 1.5" total extension.
Is a frame stiffener included?
No. SuperATV sells a frame stiffener for this machine separately: the Polaris RZR Pro R Rear Differential Frame Stiffener. It reinforces the frame for portals, lifts and bigger tires.
Are install instructions available?
Yes. The manufacturer installation instructions are linked on this page.
Why SuperATV
SuperATV builds GDP portals with 9310 steel alloy gears and has a dedicated portal support team. Dunes 2 Dezert SXS ships SuperATV portals nationwide.
Upgrade Your RZR Pro R
Confirm your Polaris RZR Pro R model and year above, choose your housing, idler and gear reduction, and add it to your cart.
