SuperATV Polaris Ranger Winch-Ready Front Bumper wraps the front of your Ranger XP 1000, Ranger 1000 or Ranger XP Kinetic in 1/8-inch (3 mm) steel plate and gives you a solid place to mount a winch. It is pre-fit for SuperATV Black Ops winches and bolts to the machine. Choose your model, then add a 4500 or 6000 lb. winch if you want one installed ready to go.
The mount accepts 3.0 x 4.87-inch (76 x 124 mm) and 3.0 x 6.6-inch (76 x 168 mm) winch bolt patterns, which match most leading winches; check your winch before installing. The XP 1000 version adds D-ring shackles and cutouts for 3-inch recessed cube lights, and the Ranger 1000 and XP Kinetic versions carry tow hooks.
This is the polaris ranger 1000 winch bumper SuperATV builds for the non-XP Ranger 1000, and the same plate design is the polaris ranger kinetic front bumper for the electric Ranger, so XP Kinetic owners looking for a polaris ranger xp kinetic bumper or ranger kinetic bumper are on the right page. XP 1000 trims are covered too, so it works as a polaris ranger high lifter bumper or a polaris ranger northstar front bumper. It is the superatv ranger bumper most owners start with, and the superatv polaris ranger front bumper to pair with a Black Ops winch.
Key Features
- 1/8-inch (3 mm) thick steel plate
- Pre-fit for SuperATV Black Ops winches
- Winch bolt patterns 3.0 x 4.87 inches (76 x 124 mm) and 3.0 x 6.6 inches (76 x 168 mm)
- UV-resistant powder coat
- D-ring shackles and cube light cutouts on the XP 1000 version
- Tow hooks on the Ranger 1000 and XP Kinetic versions
Built To Solve: No Front Winch Mount
- Getting stuck in mud or ruts with no way to winch out
- A plastic front end that takes the hit from brush and rocks
- No solid front recovery point on a work Ranger
Best For: Ranger Owners Who Work and Recover
- Ranger XP 1000 and XP 1000 Crew owners (2018-2024), including NorthStar, High Lifter, Texas and Trail Boss editions
- Ranger 1000 and Ranger 1000 Crew owners (2020+)
- Ranger XP Kinetic owners (2023+)
Specifications
- Material: 1/8-inch (3 mm) steel plate
- Winch bolt patterns: 3.0 x 4.87 inches (76 x 124 mm) and 3.0 x 6.6 inches (76 x 168 mm)
- Winch options: SuperATV Black Ops 4500 or 6000 lb.
- Finish: UV-resistant powder coat
- Warranty: SuperATV one-year limited warranty
- Included: front bumper and hardware; the Black Ops winch is included only when you choose a winch option, otherwise sold separately
- Manufacturer Part Number (Ranger XP 1000): FBG-P-RAN1K-00 (4500 lb. winch FBG-P-RAN1K-WN-45, 6000 lb. winch FBG-P-RAN1K-WN-60)
- Manufacturer Part Number (Ranger 1000): FBG-P-RAN1K-00#AA (winch versions -WN-45#AA and -WN-60#AA)
- Manufacturer Part Number (Ranger XP Kinetic): FBG-P-RAN1K-00#PK (winch versions -WN-45#PK and -WN-60#PK)
- Installation instructions: Front bumper instructions (PDF), 4500 lb. winch instructions (PDF), 6000 lb. winch instructions (PDF)
Fitment
Ranger XP 1000
- Polaris Ranger XP 1000 (2018-2024)
- Polaris Ranger XP 1000 Crew (2019-2024)
- Polaris Ranger XP 1000 High Lifter (2019-2024)
- Polaris Ranger XP 1000 High Lifter Crew (2019-2024)
- Polaris Ranger XP 1000 NorthStar (2018-2024)
- Polaris Ranger XP 1000 NorthStar Crew (2019-2024)
- Polaris Ranger XP 1000 Back Country (2019)
- Polaris Ranger XP 1000 Back Country Crew (2019)
- Polaris Ranger XP 1000 Texas Edition (2020-2024)
- Polaris Ranger XP 1000 Texas Edition Crew (2020-2024)
- Polaris Ranger XP 1000 Trail Boss Edition (2021-2024)
- Polaris Ranger XP 1000 Trail Boss Edition Crew (2021-2024)
Ranger 1000
- Polaris Ranger 1000 (2020+)
- Polaris Ranger 1000 Crew (2020+)
Ranger XP Kinetic
- Polaris Ranger XP Kinetic (2023+)
Dunes 2 Dezert SXS is still adding the Ranger Crew 1000 to its vehicle filter, so use the fitment list on this page to confirm your machine.
SuperATV notes for the Ranger XP 1000 and XP Kinetic versions: this bumper will not fit the Ranger Midsize, and it is not compatible with SuperATV part SPM-P-RAN1K-K-72.
SuperATV lists these applications by model and year. Fitment is not guaranteed on models or years not listed above; confirm your exact model before ordering.
FAQ
Which models does this fit?
The Polaris Ranger XP 1000 and XP 1000 Crew (2018-2024) including NorthStar, High Lifter, Back Country, Texas and Trail Boss editions, the Ranger 1000 and 1000 Crew (2020+), and the Ranger XP Kinetic (2023+).
Is the winch included?
Only when you choose the 4500 or 6000 lb. Black Ops winch option. The No Winch option is the bumper alone.
Will my own winch fit?
The mount takes 3.0 x 4.87-inch and 3.0 x 6.6-inch bolt patterns, which match most leading winches. Check your winch before installing.
Does it fit the 2025 Ranger XP 1000?
No. SuperATV lists the XP 1000 fitment for 2018-2024 models.
What is it made from?
1/8-inch (3 mm) steel plate with a UV-resistant powder coat.
Why SuperATV
SuperATV designs its Ranger protection around the machine's factory mounting points and finishes it in a UV-resistant powder coat. Dunes 2 Dezert SXS ships SuperATV parts nationwide.
Get Your Ranger Winch-Ready
Choose your model and winch, confirm your Ranger in the fitment list, and add the front bumper.
