The SuperATV 6" GDP Portal Gear Lift for the 2024+ Polaris Ranger XD 1500 Premium, Ranger XD 1500 NorthStar Premium, Ranger XD 1500 NorthStar Ultimate and related models lifts the machine 6 inches at the hubs and adds a 30%, 45% or 60% gear reduction. Choose billet aluminum or cast aluminum housings and dual or single idler gearing to match how you ride. The gear reduction in each hub relieves stress on your drivetrain, so you can run bigger tires without overworking axles and the transmission.
Pair it with the Polaris Ranger XD 1500 Frame Stiffener, sold separately.
Key Features
- Available with billet or cast aluminum housings
- Dual idler gear configuration maximizes strength
- Cool, quiet, precision-ground gears made from 9310 alloy billet steel
- 1.5 in. diameter 4340 hardened steel drive shaft
- Housings use gaskets or O-rings that don't let anything through
- Universal hub fits all major bolt patterns
- Gear reduction reduces stress on your drivetrain
- Dual idler gear configuration adds a 1" front and rear offset - 2" total extension
- Limited lifetime warranty from the manufacturer
Built To Solve: Ranger XD 1500 Clearance And Big-Tire Problems
- Not enough ground clearance for rocks, ruts and ledges
- Bigger tires that bog the machine down
- Extra strain on axles, differential and transmission from oversized tires
Best For: Polaris Ranger XD 1500 Owners
- Polaris Ranger XD 1500 owners (2024+) stepping up to bigger tires
- Mud, rock and trail riders who want more clearance and low-end torque
- Owners who want billet housings and dual idlers for the hardest use
Specifications
- Lift: 6 inches at the hubs
- Gear reduction options: 30%, 45%, 60%
- Housing options: billet aluminum, cast aluminum
- Idler options: dual, single
- Wheel requirements (per the manufacturer): 18" or larger wheel required; 20" and larger wheels cannot exceed 5" backspacing
- Warranty: Limited Lifetime warranty from the manufacturer against manufacturing defects to the original purchaser
- Included (per the manufacturer): (4) Assembled portal hub complete with 9310 gears, seals, output shaft, advanced gaskets, and thrust bearings; (4) Universal hubs and stainless steel slotted rotors with lugs; (4) Specialized steel alloy backing plates; (4) Steel caliper mounting plates; (8) Caliper mounting plate shims; (2) Front caliper adapter plates; (2) Front caliper slide pin adapters; (4) Brake pad retaining clips; (2) Steel steering arms; Extended brake lines; All required hardware, including recessed castle nut socket. A frame stiffener is not included. Anything not listed here is not included.
- Installation instructions: PGH6D-1-107-451 (PDF), PGH6-1-107-451 (PDF)
Tire Size Guide
Per the manufacturer, measured at full compression and full turn:
- 34": Stock suspension
Fitment
- Polaris Ranger XD 1500 Premium (2024+)
- Polaris Ranger XD 1500 NorthStar Premium (2024+)
- Polaris Ranger XD 1500 NorthStar Ultimate (2024+)
- Polaris Ranger Crew XD 1500 Premium (2024+)
- Polaris Ranger Crew XD 1500 NorthStar Premium (2024+)
- Polaris Ranger Crew XD 1500 NorthStar Ultimate (2024+)
The manufacturer lists these applications by model and year. Fitment is not guaranteed on models or years not listed above; confirm your exact model before ordering.
FAQ
Which machines does this fit?
The Polaris Ranger XD 1500 models and years listed in the fitment section above (2024+). Confirm your exact model before ordering.
Which gear reduction should I choose?
Higher reductions (60%) add the most low-end torque for big tires, mud and rocks. Lower reductions (30%) keep more of your top speed. The tire size guide on this page lists the manufacturer recommendations.
What tire size can I run?
The manufacturer lists tire sizes by suspension setup in the tire size guide above. The largest size listed is 34" with Stock suspension.
What wheels do I need?
18" or larger wheel required; 20" and larger wheels cannot exceed 5" backspacing.
What is the difference between single and dual idler gears?
Dual idler portals add a second idler gear in each portal box for maximum strength, per the manufacturer. Single idler is the lower-cost option. Dual idler gear configuration adds a 1" front and rear offset - 2" total extension.
Is a frame stiffener included?
No. SuperATV sells a frame stiffener for this machine separately: the Polaris Ranger XD 1500 Frame Stiffener. It reinforces the frame for portals, lifts and bigger tires.
Are install instructions available?
Yes. The manufacturer installation instructions are linked on this page.
Why SuperATV
SuperATV builds GDP portals with 9310 steel alloy gears and has a dedicated portal support team. Dunes 2 Dezert SXS ships SuperATV portals nationwide.
Upgrade Your Ranger XD 1500
Confirm your Polaris Ranger XD 1500 model and year above, choose your housing, idler and gear reduction, and add it to your cart.
