The SuperATV 8" GDP Portal Gear Lift for the 2018+ Honda Talon 1000X or Talon 1000X-4 lifts the machine 8 inches at the hubs and adds a 45% or 60% gear reduction. Choose billet aluminum or cast aluminum housings to match how you ride. The gear reduction in each hub relieves stress on your drivetrain, so you can run bigger tires without overworking axles and the transmission.
Pair it with the Honda Talon 1000 Frame Stiffener, sold separately.
Key Features
- Available with billet or cast aluminum housing
- Cool, quiet, precision ground gears made from 9310 alloy billet steel
- 1.5 in. forward and rear offset
- Increases width by 4 in. per side (8 in. total)
- 1.5 in. diameter 4340 hardened steel driveshaft
- Housings use Thermo-Tork® gaskets and rubber O-rings that don't let anything through
- Universal hubs can be set up to work with the following bolt patterns: 4/156, 4/137, 4/115, and 4/110
- Gear reduction reduces stress on your drivetrain
- Limited lifetime warranty from the manufacturer
Built To Solve: Talon 1000X Clearance And Big-Tire Problems
- Not enough ground clearance for rocks, ruts and ledges
- Bigger tires that bog the machine down
- Extra strain on axles, differential and transmission from oversized tires
Best For: Honda Talon 1000X Owners
- Honda Talon 1000X owners (2018+) stepping up to bigger tires
- Mud, rock and trail riders who want more clearance and low-end torque
- Owners who want a portal lift instead of a tall suspension lift
Specifications
- Lift: 8 inches at the hubs
- Gear reduction options: 45%, 60%
- Housing options: billet aluminum, cast aluminum
- Wheel requirements (per the manufacturer): 22" or larger wheel required; wheels cannot exceed 5" backspacing; wheels need to have a center hole of at least 3.25" (82.55mm) or require a 1" wheel spacer
- Warranty: Limited Lifetime warranty from the manufacturer against manufacturing defects to the original purchaser
- Included (per the manufacturer): (4) Assembled portal hub boxes complete with 9310 gears, seals, output shaft, Thermo-Tork® gaskets, and thrust bearings; (4) Specialized steel alloy backing plates; (4) Universal hubs and precision-ground stainless steel slotted rotors with lugs; (2) Rear bearing carriers; (4) Steel caliper mounting plates; (2) Heavy-duty lower ball joints preinstalled; (8) Caliper mounting plate spacers; Extended brake lines; All required hardware, including recessed castle nut socket. A frame stiffener is not included. Anything not listed here is not included.
- Installation instructions: PGH8-3-82-451 (PDF), PGH8-3-82-601 (PDF)
Tire Size Guide
Per the manufacturer, measured at full compression and full turn:
- 35": Stock
- 35": 2" Lift Kit
- 40": 1.5" Forward Front A-Arms
- 40": 1.5" Forward Front A-Arms and 2" Lift Kit
Fitment
- Honda Talon 1000X (2018+)
- Honda Talon 1000X-4 (2020+)
The manufacturer lists these applications by model and year. Fitment is not guaranteed on models or years not listed above; confirm your exact model before ordering.
FAQ
Which machines does this fit?
The Honda Talon 1000X models and years listed in the fitment section above (2018+). Confirm your exact model before ordering.
Which gear reduction should I choose?
Higher reductions (60%) add the most low-end torque for big tires, mud and rocks. Lower reductions (45%) keep more of your top speed. The tire size guide on this page lists the manufacturer recommendations.
What tire size can I run?
The manufacturer lists tire sizes by suspension setup in the tire size guide above. The largest size listed is 40" with 1.5" Forward Front A-Arms and 2" Lift Kit.
What wheels do I need?
22" or larger wheel required; wheels cannot exceed 5" backspacing; wheels need to have a center hole of at least 3.25" (82.55mm) or require a 1" wheel spacer.
Is a frame stiffener included?
No. SuperATV sells a frame stiffener for this machine separately: the Honda Talon 1000 Frame Stiffener. It reinforces the frame for portals, lifts and bigger tires.
Are install instructions available?
Yes. The manufacturer installation instructions are linked on this page.
Why SuperATV
SuperATV builds GDP portals with 9310 steel alloy gears and has a dedicated portal support team. Dunes 2 Dezert SXS ships SuperATV portals nationwide.
Upgrade Your Talon 1000X
Confirm your Honda Talon 1000X model and year above, choose your fitment, housing and gear reduction, and add it to your cart.
