The SuperATV Honda Pioneer 700 Flip Windshield switches between full, vented and open from your seat, so you are ready for whatever the weather does. Gas struts and a secure latch hold each position, a foam gasket and bulb seal keep it snug and rattle-free, and it arrives preassembled and made in the USA.
This honda pioneer 700 flip windshield fits the Pioneer 700 and the Pioneer 700-4 from 2014 on, so it is also the pioneer 700 flip windshield and honda pioneer 700-4 flip windshield. It is a scratch resistant flip windshield with XR Optic Hard Coating on both sides, and a utv flip windshield that doubles as a vented windshield.
Key Features
- Three positions: closed, vented or fully open
- 1/4-inch polycarbonate, which SuperATV rates at 250x stronger than glass and 25x stronger than acrylic
- XR Optic Hard Coating on both sides for scratch and UV resistance
- Gas struts and a secure latch hold each position
- Foam gasket and bulb seal for a snug, rattle-free fit
- Comes preassembled; made in the USA
Built To Solve: Weather That Changes Mid-Ride on a Honda Pioneer 700
- Rain and cold one hour, heat the next
- Stopping to remove a windshield when conditions change
- Windshields that bounce or rattle on rough trails
- Scratches from brush and mud on uncoated windshields
Best For: Pioneer 700 and 700-4 Owners Who Ride in Variable Weather
- Year-round riders who want airflow on demand
- Technical trail riders
- Two-seat and four-seat Pioneer 700 owners
- Owners who want push-button control should compare the MaxDrive power flip windshield
Specifications
- Type: flip windshield (closed, vented, open)
- Material: 1/4-inch polycarbonate
- Coating: XR Optic Hard Coating, both sides
- Hardware: gas struts, secure latch, foam gasket and bulb seal
- Assembly: comes preassembled
- Origin: made in the USA (stated by SuperATV)
- Warranty: 1 year (stated by SuperATV)
- Manufacturer Part Number: FWS-H-PIO700-002-70
Fitment
- Honda Pioneer 700 (2014+)
- Honda Pioneer 700-4 (2014+)
SuperATV notes it can be used with most soft or hard tops.
SuperATV lists these Honda Pioneer applications by model and year. Fitment is not guaranteed on models or years not listed above, or on machines with modified cages; confirm your exact model before ordering.
FAQ
How many positions does it have?
Three: full, vented and open, set from your seat with gas struts and a secure latch.
Does it fit the four-seat Pioneer 700-4?
Yes. SuperATV lists the Honda Pioneer 700 and the Pioneer 700-4, 2014 and newer.
Full or flip windshield?
SuperATV recommends full for set-and-forget protection and wiper compatibility, and flip for instant airflow control in changing conditions.
Does it come assembled?
Yes. SuperATV preassembles it, with the foam gasket and bulb seal included.
Will it crack from rocks or branches?
It is 1/4-inch polycarbonate, which SuperATV rates at 250 times stronger than glass and 25 times stronger than acrylic.
Will it work with my roof?
SuperATV notes it can be used with most soft or hard tops.
Why SuperATV
SuperATV designs its Honda Pioneer windshields in-house, cuts them from polycarbonate shaped to the cage, and builds them in Madison, Indiana; they are made in the USA and backed by a 1-year warranty. Dunes 2 Dezert SXS ships SuperATV parts nationwide, so you get a vehicle-specific Honda Pioneer fit without hunting across sites.
Complete Your Honda Pioneer 700 Flip Setup
Confirm you have a 2014+ Pioneer 700 or 700-4, then add the SuperATV Pioneer 700 or 700-4 rear windshield so the open position does not pull dust into the cab.
