The SuperATV Honda Pioneer 500 Flip Windshield lets you ride closed, vented or fully open, so the weather stops deciding when you ride. A multi-stage latch and gas struts move it between positions right from your seat, and it is 1/4-inch polycarbonate with XR Optic Hard Coating on both sides, made in the USA.
This honda pioneer 500 flip windshield also fits the Pioneer 520 from 2021 on, so it is the honda pioneer 520 flip windshield too. As a superatv pioneer 500 windshield it arrives preassembled with a foam gasket, bulb seal, clamps and a metal cross-brace. Riders searching for a pioneer 500 flip windshield or a scratch resistant flip windshield get one utv flip windshield that works as full, vented or half.
Key Features
- Three positions: closed, vented or fully open
- 1/4-inch polycarbonate, which SuperATV rates at 250x stronger than glass and 25x stronger than acrylic
- XR Optic Hard Coating on both sides for scratch and UV resistance
- Gas struts and a fast-latch hold each position
- Foam gasket and bulb seal for a sealed close
- Comes preassembled; made in the USA
Built To Solve: Changing Weather in an Open Honda Pioneer 500 Cab
- Rain, mud and cold wind on one ride and heat on the next
- Stopping to take a windshield off when the weather turns
- Rattling or slipping panels on rough ground
- Scratches and haze on uncoated windshields
Best For: Pioneer 500 and 520 Owners Who Ride Year-Round
- Owners who want one windshield for every season
- Work and trail riders who need airflow on demand
- Riders adding a roof and rear windshield for a full cab
- Owners who never need airflow can save with the SuperATV full windshield
Specifications
- Type: flip windshield (closed, vented, open)
- Material: 1/4-inch polycarbonate
- Coating: XR Optic Hard Coating, both sides
- Hardware: gas struts, fast-latch, clamps, metal cross-brace, foam gasket and bulb seal
- Assembly: comes preassembled
- Origin: made in the USA (stated by SuperATV)
- Warranty: 1 year (stated by SuperATV)
- Manufacturer Part Number: FWS-H-PIO500-70
Fitment
- Honda Pioneer 500 (2015+)
- Honda Pioneer 520 (2021+)
SuperATV notes it can be used with most soft or hard tops. SuperATV notes the lower portion of the windshield must be removed to gain access to the hood.
SuperATV lists these Honda Pioneer applications by model and year. Fitment is not guaranteed on models or years not listed above, or on machines with modified cages; confirm your exact model before ordering.
FAQ
How many positions does it have?
Three. Run it closed for full protection, vented for a breeze, or open like a half windshield, using the multi-stage latch and gas struts.
Does it fit the Pioneer 520?
Yes. SuperATV sells the same part number for the Honda Pioneer 500 and the Pioneer 520 (2021+).
Do I need to remove it to open the hood?
SuperATV notes the lower portion of the windshield must be removed to gain access to the hood.
Does it come assembled?
Yes. SuperATV preassembles it before shipping, with the foam gasket and bulb seal included.
Flip or full windshield?
Pick flip for airflow control in changing weather. Pick full for set-and-forget protection at a lower price.
Will it crack from rocks or branches?
It is 1/4-inch polycarbonate, which SuperATV rates at 250 times stronger than glass and 25 times stronger than acrylic.
Why SuperATV
SuperATV designs its Honda Pioneer windshields in-house, cuts them from polycarbonate shaped to the cage, and builds them in Madison, Indiana; they are made in the USA and backed by a 1-year warranty. Dunes 2 Dezert SXS ships SuperATV parts nationwide, so you get a vehicle-specific Honda Pioneer fit without hunting across sites.
Finish Your Honda Pioneer 500 or 520 Cab
Confirm you have a Pioneer 500 (2015+) or Pioneer 520 (2021+), then add the SuperATV Pioneer 500/520 rear windshield to stop dust suction behind the seats.
