The SuperATV Honda Pioneer 1000-5 Rear Flip Windshield closes the back of the cab to stop the dust suction you get from a front windshield alone, then flips out of the way when you need the dump bed. It is 1/4-inch light-tint polycarbonate, sealed with bulb seals and mounted with four heavy-duty clamps and two straps, with no drilling.
This honda pioneer 1000-5 rear window, also searched as honda pioneer 1000 5 rear window, pioneer 1000 5 rear window, rear window for honda pioneer 1000 5 and honda pioneer 1000 5 back window, is the honda pioneer 1000-5 rear windshield SuperATV builds for the five-seat Pioneer. It is a honda pioneer 1000-5 rear flip windshield and a honda pioneer 1000-5 tinted rear windshield, so it suits anyone shopping for a honda pioneer 1000-5 rear windshield with dump bed access or a honda pioneer 5 seater rear windshield. If you searched honda pioneer rear window, honda pioneer back window or honda pioneer rear windshield, this one is for the 1000-5 only; the three-seat Pioneer 1000 uses a different rear windshield.
Key Features
- Flip-open rear panel for cab access and airflow control
- Flips out of the way when you use the dump bed
- Eliminates suction that occurs with a front windshield on its own
- Protects against flying mud and debris
- 1/4-inch light-tint polycarbonate, which SuperATV rates at 250x stronger than glass and 25x stronger than acrylic
- Four heavy-duty clamps plus two straps around the cab frame
- Bulb seals keep moisture and rain out
- Comes preassembled; no drilling required
- Made in the USA
Built To Solve: Dust Suction and Bed Access on a Honda Pioneer 1000-5
- Dust pulled into the cab when you run a front windshield
- Mud and debris thrown in from behind
- Rain and moisture getting in at the back of the cab
- A rear panel that blocks the dump bed
Best For: Pioneer 1000-5 Owners Who Work Out of the Bed
- Farm, ranch and job-site owners who use the dump bed daily
- Owners running a full, vented or flip front windshield
- Riders who want a rear panel they can open for airflow
Specifications
- Type: rear windshield with flip-open panel
- Material: 1/4-inch light-tint polycarbonate
- Mounting: four heavy-duty clamps and two straps; no drilling
- Seal: bulb seals
- Assembly: preassembled
- Origin: made in the USA (Madison, Indiana)
- Warranty: 1 year (stated by SuperATV)
- Manufacturer Part Number: RWS-H-PIO1K5-76
Fitment
- Honda Pioneer 1000-5 (2016-2025)
SuperATV notes it is not compatible with Honda cab enclosure doors, installation requires permanent removal of the rear window nets, and it can be used with most soft or hard tops.
SuperATV lists this application by model and year. Fitment is not guaranteed on models or years not listed above, or on machines with modified cages; confirm your exact model before ordering.
FAQ
Why add a rear windshield?
A front windshield on its own creates suction that pulls dust into the cab. A rear windshield stops it and blocks mud and debris from behind.
Can I still use the dump bed?
Yes. The panel flips out of the way when you need to use the dump bed.
Does it fit the three-seat Pioneer 1000?
No. SuperATV lists this rear windshield for the Pioneer 1000-5 (2016-2025) only. The three-seat Pioneer 1000 uses a different rear windshield.
Will it work with Honda cab doors?
No. SuperATV says it is not compatible with Honda cab enclosure doors. It can be used with most soft or hard tops.
Do I have to drill?
No. It mounts with four heavy-duty clamps and two straps around the cab frame. Installation requires permanently removing the rear window nets.
Is it tinted?
Yes. It is 1/4-inch light-tint polycarbonate to help cut glare.
Why SuperATV
SuperATV designs, manufactures and packages its windshields in Madison, Indiana, states this Pioneer 1000-5 rear windshield is made in the USA, and backs it with a 1-year warranty. Dunes 2 Dezert SXS ships SuperATV parts nationwide, so you get a vehicle-specific Pioneer 1000-5 fit without hunting across sites.
Finish Your Honda Pioneer 1000-5 Cab
Confirm you have a Pioneer 1000-5 from 2016-2025 without Honda cab doors, then pair this rear windshield with a SuperATV Pioneer 1000 full, vented or flip front windshield to close up the cab.
