SuperATV Can-Am Defender HD10 High-Clearance Lower Rear A-Arms give your Can-Am Defender HD10 1 inch of extra ground clearance. Built from 1.25-inch DOM tubing that is stronger than the stock arms, they make room for up to 27-inch tires, and a UV-resistant powder coat finish keeps them looking good after hard rides on trails, farm roads and washouts.
They bolt to your Can-Am Defender HD10 with the published install instructions, so you spend more time riding and less time in the garage. The adjustable pivot blocks let you dial in camber after adding a lift or bigger tires.
This SuperATV High-Clearance set is built specifically for the Can-Am Defender HD10 models listed below, so the geometry matches your machine.
Key Features
- 1" additional clearance
- Run up to 27" tires
- Adjustable pivot blocks for full camber adjustability
- 1.25" DOM tubing
- Utilizes stock A-arm bushings and ball joints
- Rear lower arms only
Built To Solve: Stock Arms Holding Your Defender HD10 Back
- Stock rear arms that drag on rocks, stumps and logs
- Low ground clearance under the rear of the machine
- Bent stock arms that need a stronger replacement
- Camber that drifts out of spec after a lift or bigger tires
Best For: Can-Am Defender HD10 Owners
- Can-Am Defender HD10 owners (2016+)
- Trail riders adding clearance
- Riders who want a lifetime warranty on their suspension arms
Specifications
- Added ground clearance: 1 inch
- Maximum tire size: 27-inch tires
- Tubing: 1.25-inch DOM steel
- Camber adjustment: adjustable pivot blocks
- Bushings: reuses your stock A-arm bushings (not included)
- Finish: UV-resistant powder coat
- Warranty: lifetime warranty on the A-arms against manufacturing defects to the original purchaser; ball joints and tie rod ends are wear items and are not covered by the lifetime warranty
- Manufacturer Part Number: AA-CA-DEF-R-HC-02#AC
- Included: a pair of rear lower A-arms (left and right) that reuse your stock bushings and ball joints. Anything not listed here, such as axles or tie rods unless noted, is not included.
Fitment
- Can-Am Defender HD 10 (2016-2019)
- Can-Am Defender HD 10 DPS (2016-2019)
- Can-Am Defender HD 10 Mossy Oak (2018-2019)
- Can-Am Defender HD 10 XT (2016-2019)
- Can-Am Defender HD 10 XT Cab (2016-2017)
- Can-Am Defender HD 10 XTP (2018-2019)
- Can-Am Defender MAX HD 10 DPS (2017-2019)
- Can-Am Defender MAX HD 10 XT (2017-2019)
- Can-Am Defender MAX HD 10 XT Cab (2017)
- Can-Am Defender HD 10 Limited (2020+)
- Can-Am Defender HD 10 XMR (2018+)
- Can-Am Defender HD 10 XT Cab (2018+)
- Can-Am Defender HD 10 MAX Limited (2020+)
- Can-Am Defender HD 10 MAX Lone Star Edition (2018+)
- Can-Am Defender HD 10 MAX XMR (2019+)
- Can-Am Defender HD 10 MAX XT Cab (2018+)
SuperATV lists these applications by model and year. Fitment is not guaranteed on models or years not listed above; confirm your exact model before ordering.
FAQ
Which machines does this fit?
The Can-Am Defender HD10 models and years listed in the fitment section above (2016+). Confirm your exact model before ordering.
What tire size will these A-arms clear?
Up to 27-inch tires, per SuperATV.
How much ground clearance do they add?
About 1 inch over the stock arms, thanks to the high-clearance bend.
Are bushings included?
No. These arms reuse your stock A-arm bushings.
Can I adjust camber?
Yes. The adjustable pivot blocks let you set camber, and SuperATV presets them to stock specs.
What warranty do they carry?
SuperATV backs the A-arms with a lifetime warranty against manufacturing defects to the original purchaser. Ball joints and tie rod ends are wear items and are not covered by the lifetime warranty.
Why SuperATV
SuperATV designs and tests its A-arms in-house, publishes model-specific install instructions and backs the arms with a lifetime warranty against manufacturing defects. Dunes 2 Dezert SXS ships SuperATV suspension parts nationwide.
Upgrade Your Defender HD10 Suspension
Confirm your Can-Am Defender HD10 model and year above, choose your options and add the A-arms to your cart.
