The SuperATV 9000 lb Dual-Speed Black Ops Winch gives your UTV serious recovery power, with a low speed for controlled pulls and a high speed to reel in the rope fast once you are free. It comes with 50 feet of synthetic rope, a wireless remote and a dash rocker switch, and fits mounts with a 3.0 x 6.6-inch bolt pattern.
A 1.9 HP permanent-magnet 12V motor and 266:1 gear ratio deliver a 9,000 lb rated line pull, with waterproof seals and solenoid for mud and water. Extended heavy-gauge wiring is long enough for four-seaters, and the kit includes a 6-inch aluminum hawse fairlead, fairlead bracket, hook kit, pull strap and rope stopper. It is compatible with SuperATV's 9000 lb winch-ready bumpers.
Key Features
- 9,000 lb rated line pull
- 2-speed system
- 266:1 gear ratio
- 50-foot synthetic rope
- Wireless remote (50-foot range) and dash rocker switch
- Waterproof seals and solenoid
- 1.9 HP permanent-magnet 12V motor
- 3.0 x 6.6-inch (76 x 168 mm) bolt pattern
Built To Solve: Getting Stuck Without Enough Winch for a Heavy UTV
- Small winches struggling with heavy, loaded or big-tire machines
- Slow rope retrieval after a recovery
- Steel cable that frays, kinks and rusts
- Short wiring that will not reach on four-seat machines
Best For: Heavy UTV Owners Who Need Serious Recovery Power
- Full-size and four-seat UTV owners
- Mud and rock riders who recover often
- Owners with 9000 lb winch-ready bumpers or 3.0 x 6.6-inch mounts
- Riders who want a remote for pulling from a distance
Specifications
- Rated line pull: 9,000 lb
- Gear ratio: 266:1
- Speeds: 2
- Motor: permanent-magnet DC 12V, 1.9 HP
- Rope: 50-foot synthetic
- Remote range: 50 feet
- Wiring length: 8 feet
- Dimensions (L x W x H): 14.56 x 4.41 x 4.86 inches
- Bolt pattern: 3.0 x 6.6 inches (76 x 168 mm)
- Fairlead: 6.0-inch (152.4 mm) aluminum hawse
- Included: winch, rope, wireless remote and receiver, dash rocker switch, extended wiring and waterproof solenoid, fairlead and bracket, hook kit, pull strap, rope stopper, hardware, instructions
- Manufacturer Part Number: WN-9000
Fitment
- Universal: fits most bumpers or winch mounts with a 3.0 x 6.6-inch (76 x 168 mm) bolt pattern
- Compatible with SuperATV 9000 lb winch-ready bumpers
Fitment is not guaranteed on models, trims or years not listed above, or on machines with modified chassis or aftermarket parts in the way; confirm your exact model before ordering.
FAQ
Will this winch fit my bumper?
It fits most bumpers or winch mounts with a 3.0 x 6.6-inch (76 x 168 mm) bolt pattern, including SuperATV 9000 lb winch-ready bumpers.
What does dual speed do?
Low speed gives you more control on a tough pull, and high speed reels the rope in quickly once the job is done.
Is the wiring long enough for a four-seater?
Yes. SuperATV includes heavy-gauge extended wiring long enough for four-seat machines.
Synthetic rope or steel cable?
Synthetic rope is lighter and more flexible, will not fray into sharp wires or rust, and offers strength comparable to steel cable.
How far does the remote reach?
The wireless remote has a 50-foot range.
Is it waterproof?
It uses waterproof seals and a waterproof solenoid for mud and water.
Why SuperATV
SuperATV designs, tests and builds its UTV parts in-house and backs this part with a 1-year limited warranty against manufacturing defects. Dunes 2 Dezert SXS ships SuperATV parts nationwide, so you get vehicle-specific fitment without hunting across sites.
Complete Your UTV Recovery Setup
Confirm your bumper or winch mount uses a 3.0 x 6.6-inch bolt pattern and that your machine can support a 9,000 lb winch, then add shackles, a tree saver and a snatch block to round out your recovery kit.
