The SDI E-CLIK Active PRO Shock System gives the 2026+ Can-Am Defender HD11 electronically controlled damping that reacts to the terrain as you drive. An 8-axis IMU reads the machine's movement and adjusts compression damping up to 500 times per second to reduce body roll, brake dive, bucking and bottoming, with Street, Trail and Desert modes to match the ride to the day.
SDI notes that the system performs best on a long-travel kit; it is compatible with factory suspension but may not perform as well on an OEM setup. SDI lists the H/S Button and E-CLIK harness as included with the set of four shocks; a complete parts list is not published.
Key Features
- Compression damping adjusts up to 500 times per second
- 8-axis IMU monitors vehicle movement in real time
- Street, Trail and Desert driving modes
- PRO Menu fine-tunes pitch, roll, steering, throttle and brake sensitivity
- Steering-wheel-mounted H/S Button sets all four shocks to full stiff
- 2.5" piggyback shocks with increased oil capacity
- Hydraulic bump zones for bottoming resistance
- Stainless steel shafts, low-friction seals and SDI valving
- Fully rebuildable shocks
- IP69K-rated electronics with a sealed, waterproof automotive-grade harness
Built To Solve: Body Roll and Bottoming on the Can-Am Defender HD11
- Body roll in corners and on off-camber trail sections
- Brake dive when slowing hard with a load
- Bucking and bottoming through whoops and rough two-track
- One fixed damping setting that is a compromise between street, trail and desert riding
Best For: Defender HD11 Owners Running Long-Travel Suspension
- Defender HD11 and Defender MAX HD11 owners building a long-travel machine
- Riders who switch between pavement, trail and open desert in one outing
- Owners who haul loads and want less brake dive and body roll
- Buyers on factory suspension who accept that SDI says results are best with long travel
Specifications
- Shock type: 2.5" piggyback, rebuildable
- Damping adjustment: compression, up to 500 adjustments per second
- Sensor: 8-axis IMU
- Modes: Street, Trail, Desert, plus PRO Menu tuning
- Electronics rating: IP69K
- Warranty: 1-year limited, manufacturing defects
- Manufacturer Part Number: SDI-SS-2611002
Fitment
Fits 2026+ Can-Am Defender HD 11 Limited, HD 11 XMR w/Half Doors, HD 11 XT and HD 11 XT Cab, and 2026+ Defender MAX HD 11 Limited, MAX HD 11 Lone Star, MAX HD 11 Lone Star Cab, MAX HD 11 XMR w/Half Doors, MAX HD 11 XT and MAX HD 11 XT Cab. Fitment is not guaranteed on unlisted trims or years.
FAQ
What problem does the E-CLIK system fix on a Defender HD11?
It cuts body roll, brake dive, bucking and bottoming by adjusting compression damping up to 500 times per second based on an 8-axis IMU.
Will it work on stock Defender HD11 suspension?
SDI lists it as compatible with factory suspension, but states it works best with a long-travel kit and may not perform as well on an OEM setup.
Which Defender HD11 trims does it fit?
It is listed for 2026+ Defender HD 11 Limited, XMR, XT and XT Cab, and Defender MAX HD 11 Limited, Lone Star, Lone Star Cab, XMR, XT and XT Cab.
What does the H/S Button do?
The steering-wheel-mounted H/S Button sets all four shocks to full stiff instantly.
Are install instructions available?
SDI does not publish an install sheet for this system. Because it includes a wiring harness and a steering-wheel button, many owners choose a professional install.
How does it compare with SDI Terrain Master shocks?
E-CLIK adjusts compression damping electronically up to 500 times per second with selectable drive modes. SDI Terrain Master shocks are the non-electronic option for owners who do not need active control.
Why SDI
SDI builds UTV shocks with stainless shafts, low-friction seals and its own valving, and makes them fully rebuildable so they can be serviced instead of replaced.
Complete Your Can-Am Defender HD11 Long-Travel Build
Pair the E-CLIK Active PRO Shock System with a Defender HD11 long-travel kit for the result SDI recommends. Confirm your exact trim and year against the fitment list before ordering, and plan for the harness routing and H/S Button mounting during installation.