RPM Powersports Can-Am Maverick X3 Governor Cup Bolts (2022-2024)
Shipping calculated at checkout
In stock
RPM Powersports titanium governor cup bolts replace the steel button screws that hold the governor cup on the BRP pDrive primary clutch in the Can-Am Maverick X3 Turbo. The set of six Grade 5 titanium M8 x 25mm hex flange bolts replaces OEM part 250000757, which reduces rotating weight and stops the bolts from rusting.
RPM machines these bolts from Ti-6Al-4V titanium to the factory length and thread pitch, so they go straight into the clutch. The hex flange spreads clamping load across the governor cup. Titanium handles torque differently than steel, so RPM gives specific install guidance, which you'll find in the FAQ below.
Key Features
- Grade 5 (Ti-6Al-4V) titanium, no rust or corrosion
- Lighter than steel, less rotating inertia at the primary clutch
- Factory length and thread pitch, a straight bolt-in replacement
- Integrated hex flange spreads clamping load across the governor cup
- Set of 6, one complete governor cup
Built To Solve: Rusted or Heavy Steel Governor Cup Bolts on the X3 pDrive Clutch
- Factory steel governor cup hardware that corrodes or seizes
- Extra rotating weight on the primary clutch
- Bolts that need replacing during a clutch rebuild or tune
- Hardware that loosens under high-RPM clutch harmonics when it isn't threadlocked
Best For: Can-Am X3 Turbo Owners Servicing the pDrive Primary Clutch
- 2022-2024 Maverick X3 Turbo owners with the pDrive primary clutch (Turbo RR, X DS, X RS, X RC, X MR, MAX)
- 2015-2017 Maverick 1000R Turbo owners
- Riders rebuilding or re-tuning the primary clutch who want new hardware
- Owners adding titanium hardware throughout the clutch
Specifications
- Material: Grade 5 titanium (Ti-6Al-4V)
- Quantity: set of 6 hex flange bolts
- Thread / size: M8 x 1.25 x 25mm hex flange
- Replaces: BRP OEM 250000757
- Threadlocker: blue medium-strength required
- Torque: reduce the factory steel torque spec by 10% to 15% (RPM guidance)
- Manufacturer Part Number: TIK-000-012
Fitment
RPM lists these bolts as a direct replacement for the governor cup / button hardware on BRP pDrive and turbo primary clutches. Can-Am UTV fitment listed by RPM:
- Can-Am Maverick X3 Turbo models with the pDrive primary clutch, 2022-2024 (Turbo RR, X DS, X RS, X RC, X MR, MAX)
- Can-Am Maverick 1000R Turbo models, 2015-2017
RPM's compatibility chart also lists some 2025-2027 Maverick X3 models. Make sure your clutch uses governor cup hardware matching OEM 250000757 before you order. Fitment is not guaranteed on applications RPM doesn't list.
FAQ
What do governor cup bolts do on the Can-Am X3 pDrive clutch?
They hold the governor cup on the primary clutch. RPM's titanium set replaces the six factory steel screws (OEM 250000757) one for one.
Why switch to titanium clutch bolts?
Grade 5 titanium won't rust or seize like steel, and it's lighter, which cuts rotating weight at the primary clutch.
Which Maverick X3 years do these titanium governor cup bolts fit?
RPM lists 2022-2024 Maverick X3 Turbo models with the pDrive primary clutch, including Turbo RR, X DS, X RS, X RC, X MR and MAX, plus the 2015-2017 Maverick 1000R Turbo.
What size are the bolts?
M8 x 1.25 x 25mm hex flange, six per set.
How do I install titanium governor cup bolts?
RPM says to put blue medium-strength threadlocker on clean threads and torque to 10% to 15% below the factory spec for the steel bolts. That keeps the threads in the aluminum clutch from fatiguing.
How is this different from the RPM X3 titanium secondary bolt kit?
This set holds the governor cup on the primary clutch. The secondary bolt and washer kit replaces the bolt on the secondary clutch. They're separate parts, and many owners upgrade both.
Why RPM Powersports
RPM Powersports builds titanium clutch hardware, tools and turbo parts for Can-Am, Polaris and Kawasaki UTVs, and lists the OEM numbers its parts replace, so you can confirm the match before you order.
Complete Your Can-Am X3 Titanium Clutch Hardware Upgrade
Before you order these titanium governor cup bolts, confirm your X3 has the pDrive primary clutch and the hardware matches OEM 250000757. Have blue threadlocker and a torque wrench ready. If you're already in the clutch, think about the RPM X3 titanium secondary bolt kit, the CT820 clutch compression tool, or an RPM ECF clutch fan to bring belt temps down.