The KFI Pro-S tapered side shield bolts to the end of a Pro-S steel plow blade to stop snow and dirt from spilling off the side. It is 3/16-inch grade 50 steel, adds 2-1/4 inches of width per shield, and fits either end.
Sold one per package; buy two for both ends. For a square box-end shield, KFI makes 106475.
A snow plow side shield works like small UTV plow wings or UTV snow plow wings at the blade end, one of the simplest UTV plow extensions. KFI plow parts and other UTV snow plow accessories and UTV snow plow parts like this keep a KFI snow plow or KFI UTV plow working on UTV snow plows of every size; they are sold separately from the push tube, blade and mount, so you add only the UTV plow accessories your setup needs.
Key Features
- Reduces snow and dirt spillover at the blade end
- Universal left or right (1 shield included)
- 3/16-inch grade 50 steel, powder coated black
- Adds 2-1/4 inches of width per shield
Built To Solve: Snow Spilling Off the End of the Blade
- Windrows spilling back into the cleared path
- Pushing snow straight ahead with no containment
Best For: Pro-S Steel Blade Owners
- Owners pushing snow straight to a pile
Specifications
- Product type: plow side shield
- Brand: KFI
- Material: 3/16-inch grade 50 steel
- Width added: 2-1/4 inches per shield
- Quantity: 1 (left or right)
- Included: shield, upper / middle / lower brackets, carriage bolts and nylock nuts
- Manufacturer Part Number: 105540
Fitment
Works with:
- KFI Pro-S straight blades 105048, 105054, 105060, 105066 and 105072
- Moose straight blades (except 42-inch)
Drilling: KFI lists some drilling required; the instructions mark the blade with a paper template and drill with a 21/64- to 3/8-inch bit. Not for Pro-Poly blades, which use their own side shields. Fitment is not guaranteed on unlisted setups.
FAQ
Is it sold as a pair?
No, one shield per package; it fits either end.
Does installation require drilling?
Yes. KFI's template-guided install drills the blade with a 21/64- to 3/8-inch bit.
Does it fit Pro-Poly blades?
No. It is for Pro-S steel blades and Moose straight blades except the 42-inch.
How much width does it add?
2-1/4 inches per shield.
Is this a genuine KFI part?
Yes. It is KFI manufacturer part number 105540, sold new.
Why KFI
KFI (Kappers Fabricating) designs and builds winch mounts, plow mounts and complete UTV plow systems in the USA, sells replacement parts for its plows, and publishes installation instructions for its parts.
Contain the Snow at Your Blade Ends
Order one KFI Pro-S tapered side shield for each end you want covered. Order from Dunes 2 Dezert SXS.
