The KFI Pro 2.0 track extension actuator bracket kit lets you angle your KFI plow from the seat with the ACT203 hydraulic actuator. It is the bracket set for running a KFI ACT203 actuator on a 106300 push tube fitted with the 106330 track extension. The tube, extension and actuator are sold separately.
Power angle means no more climbing out to pull a pin every time you change direction. Add the actuator, the brackets and a switch or hand remote.
These brackets are how UTV plow power angle gets onto a KFI push tube: they hold the KFI plow actuator (KFI actuator ACT203), a UTV plow actuator also searched as a UTV plow angle actuator. KFI plow parts and other UTV snow plow accessories and UTV snow plow parts like this keep a KFI snow plow or KFI UTV plow working on UTV snow plows of every size; they are sold separately from the push tube, blade and mount, so you add only the UTV plow accessories your setup needs.
Key Features
- Mounts the ACT203 actuator on a 106300 tube with the 106330 track extension
- Requires track extension 106330
- All mounting hardware included
- Powder coated
- Made in the USA
Built To Solve: Angling the Plow Without Leaving the Seat
- Climbing out to pull the angle pin on every pass
- No mounting point for a hydraulic actuator on the push tube
Best For: KFI Pro 2.0 Owners Adding Power Angle
- Owners converting a manual KFI plow to power angle
- Owners clearing long driveways and lots
Specifications
- Product type: actuator bracket kit
- Brand: KFI
- Included: actuator cradle bracket, rear actuator bracket, flat cradle keeper, lift latch stop, track extension spacer and hardware kit HK-406
- Not included: push tube 106300, actuator ACT203, track extension 106330
- Country of origin: USA
- Manufacturer Part Number: 106335
Fitment
Works with:
- KFI Pro 2.0 push tube 106300
- KFI track extension 106330 (required)
- KFI ACT203 hydraulic actuator
Drilling: Yes. KFI lists drilling as required; the instructions drill the rear-most cradle keeper holes through the track extension and push tube with a 13/32-inch bit where needed. You also need a control: wire harness 106940 (dash switch) or hand remote kit 106950. Fitment is not guaranteed on unlisted setups.
FAQ
What else do I need for power angle?
The KFI ACT203 actuator and a control: the 106940 dash switch harness or the 106950 hand remote kit.
Does installation require drilling?
Yes. KFI lists drilling as required; the instructions drill the rear-most cradle keeper holes through the track extension and push tube with a 13/32-inch bit where needed.
Is the actuator included?
No. The ACT203 actuator and the push tube are sold separately.
Does it fit the round 105635 tube?
No. It is designed for the square Pro 2.0 106300 tube.
Is this a genuine KFI part?
Yes. It is KFI manufacturer part number 106335, sold new.
Why KFI
KFI (Kappers Fabricating) designs and builds winch mounts, plow mounts and complete UTV plow systems in the USA, sells replacement parts for its plows, and publishes installation instructions for its parts.
Add Power Angle to Your KFI Pro 2.0 Plow
Order the KFI track extension actuator bracket kit, plus the ACT203 actuator and a switch or hand remote if you do not have them. Order from Dunes 2 Dezert SXS.
