The KFI Polaris General 1000 plow mount is the vehicle-side base for a KFI UTV snow plow, built so your Polaris General 1000 can push snow with a KFI push tube and blade. It is listed for the Polaris General 1000 and General 4 1000 (non-XP) and dual rear A-arm RZR 900 and RZR 1000, and it is made in the USA from grade 50 steel.
This is a KFI plow mount only. Pair it with a KFI push tube and blade to build a complete KFI UTV plow, then pull the hitch pins to take the plow off when spring comes.
Every KFI snow plow on a UTV is built from three parts: the vehicle-specific KFI UTV plow mount, a KFI push tube and a blade. This snow plow mount is the first piece; add the tube and blade and you have a complete UTV plow kit or UTV snow plow kit. KFI UTV snow plows share one push tube and blade line, so each mount is the only vehicle-specific UTV plow part. It is the base for a Polaris General snow plow on the non-XP General 1000: this polaris general plow mount takes the push tube for a polaris general 1000 snow plow or polaris general 1000 plow. On the RZR side it is the polaris rzr plow mount for a rzr snow plow on dual A-arm 900 and 1000 models, so polaris rzr 1000 plow shoppers start here too.
Key Features
- Vehicle-specific KFI plow mount for the Polaris General 1000 and General 4 1000 (non-XP) and dual rear A-arm RZR 900 and RZR 1000
- Plate made from 1/4-inch grade 50 steel with 1/4-inch grade 50 steel plow mounting tabs
- Front lower plow mount system: the push tube pins on and off with two standard 5/8-inch hitch pins (the pins come with the push tubes)
- Works with the KFI Pro 2.0 UTV push tube 106300 (square tube), the discontinued round-style KFI UTV push tube 105635, or the KFI Pro-V plow system
- Metal bead blasted before powder coating, then powder coated black
- All mounting hardware and complete installation instructions included
- Made in the USA
Built To Solve: Mounting a Snow Plow on the Polaris General 1000
- No factory way to hang a snow plow on the Polaris General 1000
- Shoveling driveways, lanes and yards by hand after every storm
- Plow setups that bolt to the wrong points and flex under load
- A plow that has to come off quickly when the snow is gone
Best For: Polaris General 1000 Owners Who Plow Snow
- Polaris General 1000 owners clearing their own driveways, farm lanes, shop lots and trails
- Owners building a KFI UTV snow plow kit one piece at a time: mount, push tube, blade
- Owners replacing a lost or damaged KFI plow mount
Specifications
- Product type: UTV front lower plow mount
- Brand: KFI
- Plate: 1/4-inch grade 50 steel; plow mounting tabs: 1/4-inch grade 50 steel
- Connection: two 5/8-inch hitch pins (supplied with the push tubes)
- Compatible tube systems: KFI Pro 2.0 106300, KFI round 105635 (discontinued), KFI Pro-V
- Finish: bead blasted, black powder coat
- Included: frame bracket, plow mount, bolt plate, 3/8-inch bolts and washers, and 2 M10 x 100mm bolts with nuts
- Country of origin: USA
- Manufacturer Part Number: 105930
Fitment
KFI lists this mount for:
- General 1000, all non-XP models (2016-2027)
- General 4 1000, all non-XP models (2017-2025)
- RZR 900 / S / Trail, dual rear A-arm (2015-2027)
- RZR 4 900 / S, dual rear A-arm (2015-2018)
- RZR 1000 / S / Trail, dual rear A-arm (2016-2027)
- RZR S 4 1000, dual rear A-arm (2019-2020)
KFI states this mount will not work on General XP models; the General XP 1000 uses KFI 106160. If your machine has a lift kit, larger tires, forward A-arms or tracks, KFI says you may also need a KFI push tube leveling kit. This is the vehicle-side mount only: the push tube, blade and a winch to lift the plow are sold separately. Fitment comes from the KFI application chart for this part and is not guaranteed on unlisted models or years.
FAQ
Will this plow mount fit my Polaris General 1000?
KFI lists it for: General 1000, all non-XP models (2016-2027); General 4 1000, all non-XP models (2017-2025); RZR 900 / S / Trail, dual rear A-arm (2015-2027); RZR 4 900 / S, dual rear A-arm (2015-2018); RZR 1000 / S / Trail, dual rear A-arm (2016-2027); RZR S 4 1000, dual rear A-arm (2019-2020). Check the notes under Fitment and confirm your exact model and year before you order.
What else do I need to plow snow with my Polaris General 1000?
This is the mount only. Add a KFI UTV push tube (Pro 2.0 106300, the older round 105635, or the Pro-V tube kit), a KFI blade, and a winch to raise and lower the plow. A plow pulley keeps the winch line from rubbing.
Does installation require drilling?
KFI's instructions bolt the mount to the machine with the included hardware. Read the full instructions on this page before you start.
Can I leave the mount on all year?
Yes. It sits under the front of the machine, and the push tube pins on and off with hitch pins when you need the plow.
Which KFI blade should I run on my Polaris General 1000?
KFI sells Pro-S steel and Pro-Poly straight blades in 60, 66 and 72 inches, plus the Pro-V plow. Pick a width that clears your tires; the mount does not change with blade size.
Why KFI
KFI (Kappers Fabricating) designs and builds winch mounts, plow mounts and complete UTV plow systems in the USA, sells replacement parts for its plows, and publishes installation instructions for its parts.
Build Your Polaris General 1000 Snow Plow Setup
Order the KFI Polaris General 1000 plow mount, then add the push tube, blade and plow pulley from the related products below. Confirm your model and year against the fitment list first. Order from Dunes 2 Dezert SXS.
