The KFI Kubota RTV/RTV-X plow mount gives your machine a vehicle-specific way to push snow, so winter work and recovery jobs get done without improvised brackets. It is listed for Kubota RTV/RTV-X models (2008+); check the fitment list below against your exact model and year before you order.
If you are shopping for a Kubota RTV plow mount or Kubota RTV snow plow, this is the KFI part made for that machine. It is sold as the plow mount only, so plan the matching components listed below.
Key Features
- Plow mount plate for Kubota RTV and RTV-X utility vehicles
- Steel bead blasted before powder coating for a durable finish
- Installs with M12 bolts at the factory bumper bolt locations
- Connects a KFI UTV plow push tube system to the RTV
Built To Solve: Kubota RTV/RTV-X Plow Mount Needs
- No factory way to attach a plow push tube to the machine
- Shoveling or hand-clearing driveways, lanes and barn lots after every storm
- Plow setups that bolt to the wrong points and flex or bend under load
- Needing a mount that comes off the plow quickly when winter is over
Best For: Kubota RTV/RTV-X Owners Working Through Winter
- Kubota RTV/RTV-X owners who clear their own driveways, lanes, farm yards or trails with the machine
- Riders building a winter setup around the Kubota RTV/RTV-X
- Owners who have confirmed their exact model, trim and year against the fitment list below
Specifications
- Product type: Plow mount
- Brand: KFI
- Included: 1 plow mount plate; 4 hex bolts, M12-1.25 x 30 mm, with 4 flat washers; 1 soft loop strap, 12 in
- Manufacturer Part Number: 105775
Fitment
- Kubota RTV400Ci (2012-2020)
- Kubota RTV500 (2020-2021)
- Kubota RTV520 (2022)
- Kubota RTV-X1100C (2015-2022)
- Kubota RTV-X1120D (2015-2017)
- Kubota RTV900 (2010-2011)
Installation note: KFI notes the mount must sit tight against the underside of the machine while the bolts are tightened, or it can bend.
Fitment is taken from KFI data for this part. Fitment is not guaranteed on unlisted models, trims or years.
FAQ
What else do I need to plow snow with my Kubota RTV/RTV-X?
This is the vehicle-side mount only. KFI mounts connect to a KFI UTV plow push tube and blade, and a winch or actuator is needed to raise and lower the blade.
Will this plow mount work if my Kubota RTV/RTV-X is on tracks?
Yes, with the right push tube extension. KFI sells a UTV push tube track extension for machines running track systems; confirm clearance with your track kit.
Which Kubota RTV/RTV-X models and years does it fit?
It is listed for: Kubota RTV400Ci (2012-2020); Kubota RTV500 (2020-2021); Kubota RTV520 (2022); Kubota RTV-X1100C (2015-2022); Kubota RTV-X1120D (2015-2017); Kubota RTV900 (2010-2011). Confirm your exact model and year before ordering.
Is installation difficult?
The part bolts on with the included hardware. KFI notes the mount must sit tight against the underside of the machine while the bolts are tightened, or it can bend. KFI publishes installation instructions for this part, available on this page.
Do I need anything else for my Kubota RTV/RTV-X winter setup?
Many owners pair this with a matching snow plow, winch, windshield, roof or track system; the related products below are matched to the same machine.
Why KFI
KFI designs and builds winch mounts, plow mounts and UTV plow systems, and publishes installation instructions for its mounts.
Complete Your Kubota RTV/RTV-X Winter Setup
Before ordering this KFI plow mount, confirm your Kubota RTV/RTV-X model and year against the fitment list above. Pair this Kubota RTV/RTV-X plow mount with a UTV push tube and blade, and a plow fairlead pulley so the winch cable runs cleanly when you raise the blade. Browse UTV track systems to keep the machine moving in deep snow. Order from Dunes 2 Dezert SXS and we will ship it to you.
