The KFI Can-Am Maverick X3 plow mount is the vehicle-side base for a KFI UTV snow plow, built so your Can-Am Maverick X3 can push snow with a KFI push tube and blade. It is listed for the Can-Am Maverick X3 and X3 MAX plus Bennche Bighorn, Coleman Outfitter, Cub Cadet Challenger, Hisun HS and Massimo MSU models, and it is made in the USA from grade 50 steel.
This is a KFI plow mount only. Pair it with a KFI push tube and blade to build a complete KFI UTV plow, then pull the hitch pins to take the plow off when spring comes.
Every KFI snow plow on a UTV is built from three parts: the vehicle-specific KFI UTV plow mount, a KFI push tube and a blade. This snow plow mount is the first piece; add the tube and blade and you have a complete UTV plow kit or UTV snow plow kit. KFI UTV snow plows share one push tube and blade line, so each mount is the only vehicle-specific UTV plow part. It is the base for a can am x3 snow plow: this can am x3 plow mount takes the push tube for a can am x3 plow, so snow plow for can am maverick x3 shoppers start here. It also covers a cub cadet challenger snow plow, a massimo utv plow and a hisun utv snow plow on the models below.
Key Features
- Vehicle-specific KFI plow mount for the Can-Am Maverick X3 and X3 MAX plus Bennche Bighorn, Coleman Outfitter, Cub Cadet Challenger, Hisun HS and Massimo MSU models
- Plate made from 1/4-inch grade 50 steel with 1/4-inch grade 50 steel plow mounting tabs
- Front lower plow mount system: the push tube pins on and off with two standard 5/8-inch hitch pins (the pins come with the push tubes)
- Works with the KFI Pro 2.0 UTV push tube 106300 (square tube), the discontinued round-style KFI UTV push tube 105635, or the KFI Pro-V plow system
- Metal bead blasted before powder coating, then powder coated black
- All mounting hardware and complete installation instructions included
- Made in the USA
Built To Solve: Mounting a Snow Plow on the Can-Am Maverick X3
- No factory way to hang a snow plow on the Can-Am Maverick X3
- Shoveling driveways, lanes and yards by hand after every storm
- Plow setups that bolt to the wrong points and flex under load
- A plow that has to come off quickly when the snow is gone
Best For: Can-Am Maverick X3 Owners Who Plow Snow
- Can-Am Maverick X3 owners clearing their own driveways, farm lanes, shop lots and trails
- Owners building a KFI UTV snow plow kit one piece at a time: mount, push tube, blade
- Owners replacing a lost or damaged KFI plow mount
Specifications
- Product type: UTV front lower plow mount
- Brand: KFI
- Plate: 1/4-inch grade 50 steel; plow mounting tabs: 1/4-inch grade 50 steel
- Connection: two 5/8-inch hitch pins (supplied with the push tubes)
- Compatible tube systems: KFI Pro 2.0 106300, KFI round 105635 (discontinued), KFI Pro-V
- Finish: bead blasted, black powder coat
- Included: plow mount and M12 / M10 bolts, washers and nuts
- Country of origin: USA
- Manufacturer Part Number: 105555
Fitment
KFI lists this mount for:
- Bennche Bighorn 500 / 700 (2011-2016)
- Can-Am Maverick X3 and X3 MAX (2017-2026)
- Coleman Outfitter 500 / 700 (all)
- Cub Cadet Challenger 500 / 700 / 750 Crew (all)
- Hisun HS500, HS700, HS700 Crew (2015-2016) and HS750 Crew (2016)
- Massimo MSU-500, MSU-700 and MSU-700-4 (all)
Requires KFI winch mount 101520 or 101955 and a 2-inch leveling kit. Drilling: Yes, on the Can-Am Maverick X3: KFI's instructions mark two upper holes on the skid plate, then remove it and drill them. If your machine has a lift kit, larger tires, forward A-arms or tracks, KFI says you may also need a KFI push tube leveling kit. This is the vehicle-side mount only: the push tube, blade and a winch to lift the plow are sold separately. Fitment comes from the KFI application chart for this part and is not guaranteed on unlisted models or years.
FAQ
Will this plow mount fit my Can-Am Maverick X3?
KFI lists it for: Bennche Bighorn 500 / 700 (2011-2016); Can-Am Maverick X3 and X3 MAX (2017-2026); Coleman Outfitter 500 / 700 (all); Cub Cadet Challenger 500 / 700 / 750 Crew (all); Hisun HS500, HS700, HS700 Crew (2015-2016) and HS750 Crew (2016); Massimo MSU-500, MSU-700 and MSU-700-4 (all). Check the notes under Fitment and confirm your exact model and year before you order.
What else do I need to plow snow with my Can-Am Maverick X3?
This is the mount only. Add a KFI UTV push tube (Pro 2.0 106300, the older round 105635, or the Pro-V tube kit), a KFI blade, and a winch to raise and lower the plow. A plow pulley keeps the winch line from rubbing.
Does installation require drilling?
Yes, on the Can-Am Maverick X3: KFI's instructions mark two upper holes on the skid plate, then remove it and drill them.
Can I leave the mount on all year?
Yes. It sits under the front of the machine, and the push tube pins on and off with hitch pins when you need the plow.
Which KFI blade should I run on my Can-Am Maverick X3?
KFI sells Pro-S steel and Pro-Poly straight blades in 60, 66 and 72 inches, plus the Pro-V plow. Pick a width that clears your tires; the mount does not change with blade size.
Why KFI
KFI (Kappers Fabricating) designs and builds winch mounts, plow mounts and complete UTV plow systems in the USA, sells replacement parts for its plows, and publishes installation instructions for its parts.
Build Your Can-Am Maverick X3 Snow Plow Setup
Order the KFI Can-Am Maverick X3 plow mount, then add the push tube, blade and plow pulley from the related products below. Confirm your model and year against the fitment list first. Order from Dunes 2 Dezert SXS.
