The KFI Can-Am Defender HD11 plow mount is the vehicle-side base for a KFI UTV snow plow, built so your Can-Am Defender HD11 can push snow with a KFI push tube and blade. It is listed for the 2026 Can-Am Defender HD11 and 2027 Defender XU models listed below, and it is made in the USA from grade 50 steel.
This is a KFI plow mount only. Pair it with a KFI push tube and blade to build a complete KFI UTV plow, then pull the hitch pins to take the plow off when spring comes.
Every KFI snow plow on a UTV is built from three parts: the vehicle-specific KFI UTV plow mount, a KFI push tube and a blade. This snow plow mount is the first piece; add the tube and blade and you have a complete UTV plow kit or UTV snow plow kit. KFI UTV snow plows share one push tube and blade line, so each mount is the only vehicle-specific UTV plow part. It is the base for a can am defender hd11 snow plow: can am defender hd11 plow shoppers who want a classic pin-on can am defender snow plow or can am defender plow start here.
Key Features
- Vehicle-specific KFI plow mount for the 2026 Can-Am Defender HD11 and 2027 Defender XU models listed below
- Plate made from 1/4-inch grade 50 steel with 1/4-inch grade 50 steel plow mounting tabs
- 2-piece design: remove the lower seasonal bracket with five bolts to regain stock ground clearance
- Textured black powder coat
- Front lower plow mount system: the push tube pins on and off with two standard 5/8-inch hitch pins (the pins come with the push tubes)
- Works with the KFI Pro 2.0 UTV push tube 106300 (square tube), the discontinued round-style KFI UTV push tube 105635, or the KFI Pro-V plow system
- Metal bead blasted before powder coating, then powder coated black
- All mounting hardware and complete installation instructions included
- Made in the USA
Built To Solve: Mounting a Snow Plow on the Can-Am Defender HD11
- No factory way to hang a snow plow on the Can-Am Defender HD11
- Shoveling driveways, lanes and yards by hand after every storm
- Plow setups that bolt to the wrong points and flex under load
- A plow that has to come off quickly when the snow is gone
Best For: Can-Am Defender HD11 Owners Who Plow Snow
- Can-Am Defender HD11 owners clearing their own driveways, farm lanes, shop lots and trails
- Owners building a KFI UTV snow plow kit one piece at a time: mount, push tube, blade
- Owners replacing a lost or damaged KFI plow mount
Specifications
- Product type: UTV front lower plow mount
- Brand: KFI
- Plate: 1/4-inch grade 50 steel; plow mounting tabs: 1/4-inch grade 50 steel
- Connection: two 5/8-inch hitch pins (supplied with the push tubes)
- Compatible tube systems: KFI Pro 2.0 106300, KFI round 105635 (discontinued), KFI Pro-V
- Finish: bead blasted, black powder coat
- Included: frame mount (106753), seasonal plow mount (106751), 2 nut plates (105783-R) and hardware kit HK-460
- Country of origin: USA
- Manufacturer Part Number: 106750
Fitment
KFI lists this mount for:
- Defender HD11 XT / XT CAB, Limited, X mr (2026)
- Defender MAX HD11 XT / XT CAB, MAX Limited, MAX Lone Star Base / CAB, MAX X mr (2026)
- Defender XU Limited HD11, XU XT HD10 / HD11, XU XT CAB HD10 (2027)
- Defender XU MAX Limited HD11, XU MAX XT HD10 / HD11, XU MAX XT CAB HD10, XU MAX Lone Star CAB HD11 (2027)
Installed, it reduces ground clearance by about 4 inches, leaving roughly 10-11 inches depending on model. It works with the 106300 and 105635 push tubes and the KFI V-Plow, and with KFI leveling kits on lifted or tracked machines. Drilling: Yes. KFI's instructions use the frame mount's lower holes as a template to drill through the bulkhead with a 13/32-inch bit, and the factory holes may need drilling out too. If your machine has a lift kit, larger tires, forward A-arms or tracks, KFI says you may also need a KFI push tube leveling kit. This is the vehicle-side mount only: the push tube, blade and a winch to lift the plow are sold separately. Fitment comes from the KFI application chart for this part and is not guaranteed on unlisted models or years.
FAQ
Will this plow mount fit my Can-Am Defender HD11?
KFI lists it for: Defender HD11 XT / XT CAB, Limited, X mr (2026); Defender MAX HD11 XT / XT CAB, MAX Limited, MAX Lone Star Base / CAB, MAX X mr (2026); Defender XU Limited HD11, XU XT HD10 / HD11, XU XT CAB HD10 (2027); Defender XU MAX Limited HD11, XU MAX XT HD10 / HD11, XU MAX XT CAB HD10, XU MAX Lone Star CAB HD11 (2027). Check the notes under Fitment and confirm your exact model and year before you order.
What else do I need to plow snow with my Can-Am Defender HD11?
This is the mount only. Add a KFI UTV push tube (Pro 2.0 106300, the older round 105635, or the Pro-V tube kit), a KFI blade, and a winch to raise and lower the plow. A plow pulley keeps the winch line from rubbing.
Does installation require drilling?
Yes. KFI's instructions use the frame mount's lower holes as a template to drill through the bulkhead with a 13/32-inch bit, and the factory holes may need drilling out too.
What is the difference between 106750 and 106740?
106750 is the 2-piece seasonal mount: the lower bracket comes off with five bolts. 106740 stays on year-round with a built-in Swift-Latch bar.
Can I leave the mount on all year?
Yes. It sits under the front of the machine, and the push tube pins on and off with hitch pins when you need the plow.
Which KFI blade should I run on my Can-Am Defender HD11?
KFI sells Pro-S steel and Pro-Poly straight blades in 60, 66 and 72 inches, plus the Pro-V plow. Pick a width that clears your tires; the mount does not change with blade size.
Why KFI
KFI (Kappers Fabricating) designs and builds winch mounts, plow mounts and complete UTV plow systems in the USA, sells replacement parts for its plows, and publishes installation instructions for its parts.
Build Your Can-Am Defender HD11 Snow Plow Setup
Order the KFI Can-Am Defender HD11 plow mount, then add the push tube, blade and plow pulley from the related products below. Confirm your model and year against the fitment list first. Order from Dunes 2 Dezert SXS.
