The KFI Arctic Cat Prowler plow mount gives your machine a vehicle-specific way to push snow, so winter work and recovery jobs get done without improvised brackets. It is listed for Arctic Cat Prowler models (2006-2015); check the fitment list below against your exact model and year before you order.
If you are shopping for an Arctic Cat Prowler plow mount or Arctic Cat Prowler snow plow, this is the KFI part made for that machine. It is sold as the plow mount only, so plan the matching components listed below.
Key Features
- Vehicle-specific plow mount plate for Arctic Cat Prowler models
- Steel bead blasted before powder coating for a durable finish
- Bolts under the machine with 5/8 in bolts and 3/8 in U-bolts
- Connects a KFI UTV plow push tube system to the Prowler chassis
Built To Solve: Arctic Cat Prowler Plow Mount Needs
- No factory way to attach a plow push tube to the machine
- Shoveling or hand-clearing driveways, lanes and barn lots after every storm
- Plow setups that bolt to the wrong points and flex or bend under load
- Needing a mount that comes off the plow quickly when winter is over
Best For: Arctic Cat Prowler Owners Working Through Winter
- Arctic Cat Prowler owners who clear their own driveways, lanes, farm yards or trails with the machine
- Riders building a winter setup around the Arctic Cat Prowler
- Owners who have confirmed their exact model, trim and year against the fitment list below
Specifications
- Product type: Plow mount
- Brand: KFI
- Included: 1 plow mount plate; 2 bolts, 5/8-11 x 2 3/4 in, with nylock nuts and flat washers; 2 square U-bolts with 4 flanged nylock nuts
- Manufacturer Part Number: 105370
Fitment
- Arctic Cat Prowler 650, 700 and 1000 (2006-2014)
- Arctic Cat Prowler 550 (2009)
- Arctic Cat Prowler 500 HDX (2014-2015)
Installation note: KFI instructs drilling two holes through the skid plate, using the mount plate as a template.
Fitment is taken from KFI data for this part. Fitment is not guaranteed on unlisted models, trims or years.
FAQ
What else do I need to plow snow with my Arctic Cat Prowler?
This is the vehicle-side mount only. KFI mounts connect to a KFI UTV plow push tube and blade, and a winch or actuator is needed to raise and lower the blade.
Will this plow mount work if my Arctic Cat Prowler is on tracks?
Yes, with the right push tube extension. KFI sells a UTV push tube track extension for machines running track systems; confirm clearance with your track kit.
Which Arctic Cat Prowler models and years does it fit?
It is listed for: Arctic Cat Prowler 650, 700 and 1000 (2006-2014); Arctic Cat Prowler 550 (2009); Arctic Cat Prowler 500 HDX (2014-2015). Confirm your exact model and year before ordering.
Is installation difficult?
The part bolts on with the included hardware. KFI instructs drilling two holes through the skid plate, using the mount plate as a template. KFI publishes installation instructions for this part, available on this page.
Do I need anything else for my Arctic Cat Prowler winter setup?
Many owners pair this with a matching snow plow, winch, windshield, roof or track system; the related products below are matched to the same machine.
Why KFI
KFI designs and builds winch mounts, plow mounts and UTV plow systems, and publishes installation instructions for its mounts.
Complete Your Arctic Cat Prowler Winter Setup
Before ordering this KFI plow mount, confirm your Arctic Cat Prowler model and year against the fitment list above. Pair this Arctic Cat Prowler plow mount with a UTV push tube and blade, and a plow fairlead pulley so the winch cable runs cleanly when you raise the blade. Browse UTV track systems to keep the machine moving in deep snow. Order from Dunes 2 Dezert SXS and we will ship it to you.
