AJK Offroad Hitch Skid with Recovery Point, 10 x 10 Plate
Shipping calculated at checkout
Low stock
The AJK Offroad hitch skid with recovery point lets you slide across inclines without dragging your factory hitch over rocks, trees or obstacles.
Each hitch skid is built from 2 x 2-inch square tube with a 1/4-inch wall, with a 1/4-inch steel plate fully MIG welded to it and a recovery clevis welded to both the plate and tube. The clevis is 0.875 inch thick with a 1-inch bore for a standard 3/4-inch shackle, and it is designed for a 5/8-inch receiver pin. These were formerly the Sheridan Hitch Skid by WarFab Armor; AJK took over production. Use it for controlled winching and recovery only. This standard version has a 10 x 10-inch plate and four mounting pin holes. It is one size fits most for vehicles with a 2-inch receiver, especially Toyota Tacomas; some vehicles need different holes or plastic trimming.
Key Features
- Protects the factory hitch
- Built-in recovery point
- 10 x 10-inch, 1/4-inch plate
- Four pin hole positions
- Fits 3/4-inch shackle
- Made in USA
Built To Solve: A Hitch That Drags on Obstacles
- Hitch hanging up on rocks
- No rear recovery point
- Low rear clearance
Best For: Truck and SUV Off-Roaders
- Toyota Tacoma owners
- 2-inch receiver vehicles
- Rock and trail driving
Specifications
- Tube: 2 x 2-inch, 1/4-inch wall
- Plate: 10 x 10 inches, 1/4 inch
- Clevis: 0.875 inch thick, 1-inch bore
- Pin: 5/8 inch; four hole positions
- Made in USA
- Manufacturer Part Number: 200401
Fitment
Universal fit; check the sizes and specifications listed before ordering.
FAQ
What does the AJK hitch skid do?
Lets you slide over obstacles without dragging the hitch.
Does it have a recovery point?
Yes, a clevis for a 3/4-inch shackle.
What vehicles does it fit?
Most with a 2-inch receiver, especially Tacomas.
Is there a short version?
Yes, for vehicles with a rear spare.
Was it made by WarFab?
It was the Sheridan Hitch Skid by WarFab Armor; AJK now makes it.
Is it made in the USA?
Yes, per AJK Offroad.
Why AJK Offroad
AJK Offroad designs and builds its off-road parts in the USA from CNC machined 6061-T6 billet aluminum and laser-cut steel, and stocks the hardware and electrical parts its own builds use. The line covers clamps, mounts, recovery, towing and electrical parts for side-by-sides, UTVs, tube buggies and Jeeps, and Dunes 2 Dezert SXS carries the full AJK Offroad range in one place.
Protect Your Hitch
Add the skid, or choose the short version for rear spares.
