High Lifter Polaris RZR Turbo Portal Gear Lift (2016-2021)
Shipping calculated at checkout
In stock
Adding 8-inch portals to a Polaris RZR XP Turbo calls for larger wheels, and replacing factory brake lines can add work to the installation. Listed for: Polaris RZR XP 4 Turbo 2016 - 2021; Polaris RZR XP Turbo 2016 - 2021. Fitment is not guaranteed on unlisted applications. High Lifter's dual-idler portal gear lift uses forged gear boxes and a 50% gear reduction. A brake line extension lets the factory brake lines stay in place.
Key Features
- 8-inch dual-idler portals with 50% gear reduction
- Forged gear boxes with a tight grain structure
- Brake line extension avoids replacing factory brake lines
- 5/16-inch steel backing plates with bent flanges and welded gusset brackets
- 13-inch slotted stainless steel rotors with assembly access holes
- Dual spindle shaft oil seals and a triple input shaft seal
- Venting plug accommodates an optional vent kit
Built To Solve: RZR XP Turbo Portal Lift and Brake Line Setup
- Keep the factory brake lines in place with a brake line extension.
- Use the clocked backing plate design to help clear large tires.
- Dissipate heat through slotted 13-inch rotors.
- Protect the spindle shaft with two oil seals and the input shaft with a triple seal.
Best For: Polaris RZR XP Turbo Riders Planning an 8-Inch Portal Lift
- RZR XP Turbo and XP 4 Turbo owners shopping for a 50% portal gear reduction
- Builders planning to use wheels at least 22 inches in diameter
- Riders choosing 24-inch wheels as High Lifter recommends for 8-inch portals
- Owners using control arms built to factory hub specifications
Specifications
- Portal lift: 8 inches
- Minimum wheel size: 22 inches
- Recommended wheel size: 24 inches
- Rotor diameter: 13 inches
- Backing plate material and thickness: 5/16-inch steel
- Manufacturer part numbers: PGL-850DI-RZRT
What's in the Box
- Input shaft wiper seal
Fitment
- Polaris RZR XP 4 Turbo 2016 - 2021
- Polaris RZR XP Turbo 2016 - 2021
Fitment is based on current product data for this part and is not guaranteed on unlisted applications. If you don't see your exact setup, contact us and we'll confirm fitment before you order.
FAQ
Is a vent kit standard on these portal boxes?
The boxes have a venting plug; the vent kit is optional.
Do I have to replace the factory brake lines?
No. A brake line extension allows the factory brake lines to remain in place.
Should I choose 22-inch or 24-inch wheels?
The minimum is 22 inches, but High Lifter recommends 24-inch wheels with these 8-inch portals.
What size are the rotors?
The rotors are 13 inches in diameter.
Will the backing plates work with aftermarket control arms?
They work with control arms built to factory hub specifications.
Does this portal lift fit the four-seat RZR XP 4 Turbo?
Yes. The listed RZR XP 4 Turbo application covers 2016-2021.
Why High Lifter
High Lifter uses forged gear boxes and clocked steel backing plates on this 8-inch dual-idler portal lift.
Choose an RZR Turbo Portal Gear Lift
Check your wheel size and control arm specifications before ordering the High Lifter portal gear lift.