High Lifter Polaris RZR XP 1000 Portal Gear Lift (2024+)
Shipping calculated at checkout
In stock
The High Lifter dual idler portal gear lift for the 2024+ Polaris RZR XP 1000 and RZR XP 4 1000 adds 4, 6 or 8 inches of lift at the hub and gear reduction at the wheel, so you can run bigger tires without giving up low-end torque. Pick your lift height, then the gear reduction that matches your tire size.
These High Lifter RZR XP 1000 portals solve a common big-tire problem. Bigger tires raise your effective gearing, which costs torque and puts more strain on belts, axles and the rest of the drivetrain. A portal gear lift moves each wheel down below the hub for ground clearance and gears it down to win that torque back. High Lifter's dual idler design adds a second idler gear in each gear box, spreading the load over twice as many gear teeth. That doubles the contact area and cuts the stress on each tooth in half.
Which Kit Do I Need?
Choose the lift height first, then pick from the RZR XP 1000 gear reduction options for that height. Everything in this table comes from High Lifter's own product information for these kits.
| Lift height | Gear reduction options | Tire guidance from High Lifter | Wheel requirements from High Lifter |
|---|---|---|---|
| 4 inch | 15% or 30% | Largest tire with portals: 33 inch. Largest with forward arms: 35 inch. | 14 inch or larger. 14 inch factory wheels must run a 1 inch spacer. 14 and 15 inch wheels: 4-1/2 inch backspacing max. 16 inch and larger: 5 inch backspacing max. |
| 6 inch | 45% or 60% | High Lifter calls 45% and 60% the ideal ratio if you run a 40 inch tire or larger. | Not stated by High Lifter. |
| 8 inch | 50% | No maximum tire size stated by High Lifter. | 22 inch minimum. High Lifter recommends 24 inch wheels with 8 inch portals. |
High Lifter notes its tire fitment guide is general and not guaranteed. Tires, lifts and other modifications all affect clearance, so verify your exact setup before you order.
Key Features
- Three lift heights in one listing: 4 inch (15% or 30% reduction), 6 inch (45% or 60%) and 8 inch (50%)
- Dual idler gears spread the load over twice as many gear teeth for more reliable torque transfer
- Forged gear boxes, which High Lifter chose over cast and billet aluminum for strength
- High density Kevlar fiber gaskets that need no additional sealant
- Two oil seals on the spindle shaft and a triple seal with wiper on the input shaft
- 5/16 inch steel backing plates with bent flanges and welded gusset brackets, built to factory offset
- Precision ground, slotted stainless steel rotors with access holes (13 inch rotors on the 6 and 8 inch kits)
- Heat-treated alloy steel gears, CNC precision ground and lapped for easier installation and quieter running
Built To Solve: Torque Loss From Bigger Tires on the 2024+ RZR XP 1000
- Sluggish low-end response after moving up to larger tires
- Extra strain on belts, axles, differentials and drive shafts from taller gearing
- Not enough ground clearance under the hubs for rocks, ruts and deep mud
- Brakes working harder than they should; High Lifter says the reduction improves engine braking and extends brake life
Best For: 2024+ RZR XP 1000 and XP 4 1000 Owners Running Bigger Tires
- Trail and rock riders who want more clearance and crawling torque (4 inch kits)
- Big-tire builds running 40 inch tires or larger (6 inch kits with 45% or 60% reduction)
- Maximum-height builds on 22 to 24 inch wheels (8 inch kit)
- Riders who value torque over top speed. High Lifter notes a lower ratio performs better if you don't need to run fast
If you own a 2015-2023 RZR XP 1000, a RZR XP Turbo or a RZR Pro XP, this is not your kit. Those machines use different High Lifter portal kits.
Specifications
- Brand: High Lifter
- Product: dual idler portal gear lift
- Lift heights: 4, 6 or 8 inch
- Gear reduction: 15% or 30% (4 inch), 45% or 60% (6 inch), 50% (8 inch)
- Gear boxes: forged
- Gaskets: high density Kevlar fiber
- Backing plates: 5/16 inch steel
- Kit contents: High Lifter states each 4 inch kit includes 4 portal boxes. See the High Lifter install instructions for the full parts list for your kit.
- Manufacturer part numbers: PGL-415DI-RZR1-2 (4 inch, 15%), PGL-430DI-RZR1-2 (4 inch, 30%), PGL-645DI-RZR1-2 (6 inch, 45%), PGL-660DI-RZR1-2 (6 inch, 60%), PGL-850DI-RZR1-2 (8 inch, 50%)
Fitment
High Lifter lists these kits for the following models:
- 2024-2025 Polaris RZR XP 1000 Sport, Premium and Ultimate
- 2024-2025 Polaris RZR XP 4 1000 Sport, Premium and Ultimate
- 2026 Polaris RZR XP 1000 Sport and Ultimate
- 2026 Polaris RZR XP 4 1000 Sport and Ultimate
These 2024 RZR XP 1000 portals also fit 2025 and 2026 models as listed above, and the same RZR XP 4 1000 portal gear lift kits cover the four-seat machine. They do not fit the 2015-2023 RZR XP 1000. Fitment is not guaranteed on unlisted applications.
Install instructions for the 8 inch kit (PGL-850DI-RZR1-2): download the High Lifter install PDF.
FAQ
What gear reduction should I choose for 35 inch tires on a 2024+ RZR XP 1000?
High Lifter lists 35 inch as the largest tire for its 4 inch kit, and only with forward arms. With portals alone, the stated limit is 33 inch. The 4 inch kit comes in 15% or 30% reduction; the 30% kit gives more reduction. If you plan to go to 40 inch tires or larger, High Lifter calls the 6 inch kit's 45% or 60% the ideal ratio.
Should I get 4, 6 or 8 inch portals?
It comes down to tire and wheel size. RZR XP 1000 4 inch portals are rated for up to 33 inch tires with portals (35 inch with forward arms) on 14 inch or larger wheels. RZR XP 1000 6 inch portals are High Lifter's pick for 40 inch tires and larger. RZR XP 1000 8 inch portals need at least a 22 inch wheel, and High Lifter recommends 24 inch.
Will these portals fit my 2023 RZR XP 1000?
No. High Lifter lists these kits only for 2024-2026 RZR XP 1000 and RZR XP 4 1000 models. The 2015-2023 RZR XP 1000 uses different High Lifter portal kits.
Do I need longer axles with a High Lifter portal gear lift?
High Lifter's product information for these kits doesn't list replacement axles as required. Check the official install instructions for your kit and contact us before ordering if your machine has other suspension changes.
Is there anything else High Lifter recommends with these portals?
On the 6 inch 60% kit, High Lifter strongly recommends pairing the portals with a frame stiffener to reinforce the frame. For the 8 inch kit, plan your wheels around the 22 inch minimum (24 inch recommended). High Lifter also notes there may be a two-week lead time on the 6 inch 45% kit.
How is High Lifter's dual idler portal different from a single idler design?
High Lifter's RZR XP 1000 dual idler portals add a second idler gear to each box, so the load is spread over twice as many teeth. High Lifter says that doubles the contact area and cuts the stress in half, giving more reliable torque transfer.
Why High Lifter
High Lifter builds these portals with forged gear boxes, Kevlar fiber gaskets, multi-seal shafts and heavy steel backing plates. High Lifter warrants its products to the original retail purchaser against non-conformities in material and workmanship, with repair or replacement at High Lifter's option. See High Lifter's warranty policy for exclusions such as modified, misused or improperly installed products, and labor.
Complete Your 2024+ RZR XP 1000 Portal Build
Once you've picked the lift height and gear reduction for this Polaris RZR XP 1000 portal gear lift, plan the rest of the build: a frame stiffener, tires and wheels that fit High Lifter's size and backspacing limits, and an alignment tool to set toe after install. We strongly recommend a frame stiffener with any portal kit. Portal gear boxes add weight, leverage and stress to the factory A-arm mounting tabs, radius rod plates and chassis, and running portals on oversized tires without a stiffener greatly increases the risk of bending or ripping the factory frame tabs. Confirm your model year and seat count before ordering. These kits are built for the 2024+ RZR XP 1000 and XP 4 1000 only.