Skip to content

High Lifter Polaris RZR XP 1000 Portal Gear Lift Kit (2015-2023)

Sale price $3,955.00

Shipping calculated at checkout

Lift Height
Gear Reduction

In stock

Large tires increase the load on a Polaris RZR XP 1000 drivetrain and reduce available torque. Gearing that leaves the speedometer closer to stock can still be too high to offset that torque loss. Listed for: Polaris RZR XP 1000 2015 - 2023; Polaris RZR XP 4 1000 2015 - 2023. Fitment is not guaranteed on unlisted applications. The dual idler portals use a second idler gear to spread load over more gear teeth. The 45% reduction lowers gearing and improves engine braking, while forged gear boxes and 13-inch slotted rotors form part of the portal assembly.


Key Features

  • 6-inch portal lift with 45% gear reduction
  • Dual idler gears spread load across more gear teeth
  • Forged gear boxes with an optional venting provision
  • 13-inch precision-ground stainless steel slotted rotors
  • 5/16-inch steel backing plates with bent flanges and welded gussets
  • Two spindle-shaft oil seals and a triple input-shaft seal
  • High-density Kevlar fiber gaskets require no additional sealant

Built To Solve: RZR XP 1000 Large-Tire Gearing

  • Offsets torque loss from larger tires with 45% portal gear reduction.
  • Spreads gear load across twice as many teeth using a second idler.
  • Improves engine braking so the brakes are needed less often.
  • Uses slotted 13-inch rotors to dissipate heat.

Best For: RZR XP 1000 Riders Running Large Tires

  • Riders running 40-inch or larger tires who want lower gearing.
  • Drivers who prioritize low-speed power over running fast.
  • Builders using control arms made to factory hub specifications.

Specifications

  • Lift height: 6 inches
  • Rotor diameter: 13 inches
  • Backing plate thickness: 5/16 inch
  • Gear box construction: Forged
  • Manufacturer part numbers: PGL-645DI-RZR1

What's in the Box

  • Forged gear boxes
  • Dual idler gears
  • High-density Kevlar fiber gaskets
  • Spindle shaft oil seals
  • Input shaft triple seal with wiper seal
  • Steel backing plates
  • Stainless steel rotors

Fitment

  • Polaris RZR XP 1000 2015 - 2023
  • Polaris RZR XP 4 1000 2015 - 2023

Fitment is based on current product data for this part and is not guaranteed on unlisted applications. If you don't see your exact setup, contact us and we'll confirm fitment before you order.


FAQ

What tire size suits the 45% dual idler gearing?

High Lifter recommends this ratio for tires measuring 40 inches or larger.

How does this 6-inch RZR portal compare with High Lifter's 8-inch versions?

This RZR XP 1000 portal has a 6-inch lift and 45% reduction. High Lifter also lists 8-inch portals with 50% or 60% reduction; check their separate fitment before choosing.

Which control arms work with the RZR portal backing plates?

The backing plates work with control arms built to factory hub specifications.

How large are the rotors on this 6-inch portal?

The rotors measure 13 inches.

Does the 6-inch portal gasket need additional sealant?

No additional sealant is needed with the high-density Kevlar fiber gasket.

Is a vent kit standard on this RZR portal?

Venting uses an optional kit; the gear box has a plug for that provision.


Why High Lifter

High Lifter adds a second idler gear to this 6-inch RZR portal to spread the load over more gear teeth.


Gear Down Your RZR XP 1000

Choose the High Lifter 6-inch dual idler portal gear lift for your 2015-2023 RZR XP 1000 or XP 4 1000.

Back to top