Skip to content

High Lifter Polaris RZR RS1 6 Inch Portal Gear Lift (2018-2022)

Sale price $3,955.00

Shipping calculated at checkout

Lift Height
Gear Reduction

In stock

Large tires can cost a Polaris RZR RS1 torque and put extra strain on belts, axles and driveline parts. A lower gear ratio helps offset that loss when speed is not the priority. Listed for: Polaris RZR RS1 2018 - 2022. Fitment is not guaranteed on unlisted applications. Two idler gears spread the load across more gear teeth, while the 45% reduction helps restore torque for larger tires. Forged gear boxes, steel backing plates and 13-inch slotted rotors make up the portal assembly.


Key Features

  • 6-inch portal gear lift with 45% gear reduction
  • Dual idler gears spread load across twice as many gear teeth
  • Forged gear boxes with a plug for optional venting
  • 5/16-inch steel backing plates with bent flanges and welded gusset brackets
  • 13-inch precision-ground stainless steel rotors with cooling slots
  • Two spindle-shaft oil seals and a triple input-shaft seal
  • High-density Kevlar fiber gaskets require no additional sealant

Built To Solve: RZR RS1 Large-Tire Torque and Gear Load

  • The 45% portal gear reduction addresses torque lost to larger RS1 tires.
  • Two idler gears distribute the gear load over more teeth than a single idler.
  • Improved engine braking reduces how often the brakes are needed.
  • Slotted 13-inch rotors dissipate heat, with access holes for assembly and disassembly.
  • Dual spindle seals and a triple input seal help keep water out and oil in.

Best For: Polaris RZR RS1 Riders Running Large Tires

  • RS1 riders running 40-inch or larger tires who prioritize lower gearing over speed.
  • Buyers comparing dual-idler portals for distributing gear load.
  • RS1 builders using control arms built to factory hub specifications.

Specifications

  • Lift: 6 inches
  • Idler configuration: Dual idler
  • Rotor diameter: 13 inches
  • Backing plate: 5/16-inch steel
  • Gear box construction: Forged
  • Manufacturer part numbers: PGL-645DI-RS1

What's in the Box

  • Dual idler gears
  • Forged gear boxes
  • High-density Kevlar fiber gaskets
  • Spindle-shaft oil seals
  • Triple input-shaft seal with wiper seal
  • Steel backing plates with welded gusset brackets
  • Stainless steel rotors

Fitment

  • Polaris RZR RS1 2018 - 2022

Fitment is based on current product data for this part and is not guaranteed on unlisted applications. If you don't see your exact setup, contact us and we'll confirm fitment before you order.


FAQ

Why choose the 45% RS1 portals for large tires?

High Lifter recommends this ratio and dual-idler setup for tires measuring 40 inches or larger, particularly when top speed is not the priority.

What size are the rotors on the RS1 portals?

The rotors measure 13 inches in diameter.

Will the RS1 backing plates work with aftermarket control arms?

The backing plates work with control arms built to factory hub specifications. Confirm the arms meet that condition before ordering.

Does the RS1 portal gasket need extra sealant during assembly?

No additional sealant is needed with the high-density Kevlar fiber gasket.

Do the 6-inch RS1 portals use a single idler gear?

No. The gear box uses a second idler gear to spread the load across more teeth.


Why High Lifter

High Lifter's 6-inch RS1 portal design uses a second idler gear to spread load across twice as many gear teeth.


Set Up the RZR RS1 With 6-Inch Portals

Choose the High Lifter 45% dual-idler portal gear lift for your 2018-2022 Polaris RZR RS1.

Back to top