Skip to content

High Lifter Polaris RZR Pro XP Portal Gear Lift Kit (2020-2026)

Sale price $3,955.00

Shipping calculated at checkout

Gear Reduction

In stock

Larger tires can cost a Polaris RZR Pro XP torque, while the factory gearing may not compensate for the change in tire size. Listed for: Polaris RZR Pro XP 4 2020 - 2026; Polaris RZR Pro XP 2020 - 2026. Fitment is not guaranteed on unlisted applications. The portal gear lift adds four inches of lift and a 15% gear reduction. Two idler gears spread the load across more gear teeth, while the reduction increases engine braking.


Key Features

  • 4-inch portal lift with 15% gear reduction
  • Dual idler gears spread load across twice as many gear teeth
  • Forged gear boxes with a plug for optional venting
  • 5/16-inch steel backing plates with bent flanges and welded gusset brackets
  • Precision-ground stainless steel rotors with slots for heat dissipation
  • Dual spindle-shaft oil seals and a triple input-shaft seal
  • High-density Kevlar fiber gaskets require no additional sealant

Built To Solve: RZR Pro XP Tire Size and Gear Reduction

  • The 15% portal gear reduction addresses torque lost when running larger tires.
  • Dual idler gears spread gear load over more teeth to reduce stress.
  • Increased engine braking reduces how often the brakes are needed.
  • Slotted stainless steel rotors allow heat to dissipate.
  • Dual spindle seals and a triple input-shaft seal help keep water out and oil in.

Best For: RZR Pro XP Riders Planning Larger Tires

  • Riders looking for 15% gear reduction with dual idler portals.
  • Owners checking 14-inch or larger wheels against the stated backspacing limits.
  • Riders comparing tire clearance with stock-position or forward control arms.
  • Owners using control arms built to factory hub specifications.

Specifications

  • Lift height: 4 inches
  • Gear reduction: 15%
  • Gear configuration: Dual idler
  • Backing plate: 5/16-inch steel
  • Minimum wheel diameter: 14 inches
  • Wheel backspacing: Maximum 4-1/2 inches for 14- and 15-inch wheels; maximum 5 inches for 16-inch and larger wheels
  • Tire fitment guide: 33 inches with portal; 35 inches with forward arms; fitment is not guaranteed
  • Maximum tire size recommendation: 44 inches; the separate tire fitment guide lists 33 and 35 inches
  • Manufacturer part numbers: PGL-415DI-RZRPRO

What's in the Box

  • Four portal boxes
  • High-density Kevlar fiber gaskets
  • Spindle-shaft oil seals
  • Triple input-shaft seal with wiper seal
  • Steel backing plates with welded gusset brackets
  • Stainless steel rotors
  • Dual idler gears

Fitment

  • Polaris RZR Pro XP 4 2020 - 2026
  • Polaris RZR Pro XP 2020 - 2026

Fitment is based on current product data for this part and is not guaranteed on unlisted applications. If you don't see your exact setup, contact us and we'll confirm fitment before you order.


FAQ

Do the portal gaskets need additional sealant?

No additional sealant is needed with the high-density Kevlar fiber gaskets.

Do factory 14-inch wheels need spacers?

Yes. Factory 14-inch wheels must run a 1-inch spacer.

Why consider a lower gear ratio for larger tires?

A lower ratio can help offset torque lost to larger tires, particularly if high speed is not the priority. This portal gear lift has a 15% reduction.

What backspacing can 14- and 15-inch wheels have?

The maximum stated backspacing is 4-1/2 inches for both wheel sizes.

Is the stated tire fitment guaranteed?

No. Tire brand, lift and other modifications can affect clearance, so verify the combination before buying.

Does this portal lift fit both two- and four-seat RZR Pro XP models?

Yes. The stated applications are the RZR Pro XP and RZR Pro XP 4 for 2020-2026.


Why High Lifter

High Lifter uses a second idler gear to spread the portal gear load across twice as many teeth.


Choose the RZR Pro XP 4-Inch Portal Lift

Check your wheel backspacing and tire clearance, then order the High Lifter portal gear lift from Dunes 2 Dezert SXS.

Back to top