Skip to content

High Lifter Polaris Ranger 1000 6-Inch Portal Gear Lift

Sale price $3,955.00

Shipping calculated at checkout

Lift Height
Gear Reduction

In stock

Large tires put more demand on a Polaris Ranger 1000 drivetrain and reduce the torque available at the wheels. A ratio that keeps the speedometer closer to its stock reading may still be too high to offset that loss. Listed for: Polaris Ranger 1000 2020; Polaris Ranger Crew XP 1000 2019 - 2020; Polaris Ranger XP 1000 2018 - 2020. Fitment is not guaranteed on unlisted applications. High Lifter's 6-inch gear reduction kit uses 60% gearing and a second idler gear. The two idlers spread load over twice as many gear teeth, reducing stress on the gear sets.


Key Features

  • Six-inch portal gear lift with 60% gear reduction
  • Dual idler gears spread gear-set load over twice as many teeth
  • Forged gear boxes with an optional venting provision
  • High-density Kevlar fiber gaskets require no additional sealant
  • Two spindle-shaft oil seals and a triple input-shaft seal
  • 5/16-inch steel backing plates with bent flanges and welded gussets
  • Slotted 13-inch stainless steel rotors with assembly access holes

Built To Solve: Polaris Ranger 1000 Large-Tire Gearing

  • Uses 60% gearing to address torque lost when running larger tires.
  • Spreads gear load across twice as many teeth with dual idler gears.
  • Improves engine braking so the brakes are needed less often.
  • Uses slotted rotors to help dissipate brake heat.
  • Places two oil seals on the spindle shaft to protect against water intrusion and oil leaks.

Best For: Polaris Ranger Riders Running Large Tires

  • Ranger owners running 40-inch or larger tires who want 60% gearing.
  • Riders who favor lower gearing and pulling power over high speed.
  • Ranger builders looking for 6-inch portals with dual idler gears.
  • Owners using control arms built to factory hub specifications.

Specifications

  • Lift height: 6 inches
  • Gear reduction: 60%
  • Rotor diameter: 13 inches
  • Backing plate thickness: 5/16 inch
  • Gear box construction: Forged
  • Manufacturer part numbers: PGL-660DI-RNG1

What's in the Box

  • Forged gear boxes
  • Dual idler gears
  • High-density Kevlar fiber gaskets
  • Spindle-shaft oil seals
  • Triple input-shaft seal with wiper seal
  • Steel backing plates with welded gusset brackets
  • Stainless steel rotors

Fitment

  • Polaris Ranger 1000 2020
  • Polaris Ranger Crew XP 1000 2019 - 2020
  • Polaris Ranger XP 1000 2018 - 2020

Fitment is based on current product data for this part and is not guaranteed on unlisted applications. If you don't see your exact setup, contact us and we'll confirm fitment before you order.


FAQ

Do the portal gaskets need additional sealant?

No. The high-density Kevlar fiber gaskets do not need additional sealant.

Will these backing plates work with aftermarket control arms?

They work with control arms built to factory hub specifications.

Who should consider the 60% dual-idler version?

High Lifter recommends this ratio and dual-idler setup for tires measuring 40 inches or larger.

How large are the portal brake rotors?

The rotors measure 13 inches.

Can the gear boxes be vented?

The boxes have a venting provision. High Lifter describes the vent kit as optional and says it will be available soon.

Does this version fit a 2019 Ranger Crew XP 1000?

Yes. The listed Ranger Crew XP 1000 application covers 2019–2020.


Why High Lifter

High Lifter adds a second idler gear to this portal gear box to spread the load over twice as many gear teeth.


Gear Down Your Polaris Ranger 1000

Choose the High Lifter 6-inch portal gear lift for your listed Ranger model and tire setup.

Back to top