High Lifter Polaris General XP 1000 Portal Gear Lift (2020-2026)
Shipping calculated at checkout
In stock
Larger tires can reduce available torque on a Polaris General XP 1000 and put added demands on driveline parts. Listed for: Polaris General XP 1000 2020 - 2026. Fitment is not guaranteed on unlisted applications. High Lifter's 6-inch gear reduction kit uses 45% gearing and a second idler gear to spread the load across more gear teeth.
Key Features
- Dual idler gears spread the load across twice as many gear teeth.
- 45% gearing improves engine braking, according to High Lifter.
- Forged gear boxes use a plug for an optional vent kit.
- 5/16-inch steel backing plates have bent flanges and welded gusset brackets.
- 13-inch precision-ground stainless steel rotors have slots for heat dissipation.
- Two spindle-shaft oil seals and a triple input-shaft seal help protect the gear boxes.
- High-density Kevlar fiber gaskets require no additional sealant.
Built To Solve: Polaris General XP 1000 Large-Tire Gear Load
- Spread gear load over more teeth with the second idler gear.
- Use 45% gearing to address torque loss from larger tires.
- Rely more on engine braking and less on the brakes.
- Help keep water out and oil in with dual spindle-shaft seals.
Best For: Polaris General XP 1000 Two-Seat Riders
- Two-seat General XP 1000 owners considering 6-inch portals.
- Riders running 40-inch or larger tires who want 45% gearing.
- General XP 1000 owners prioritizing lower gearing over speed.
- Builders using control arms made to factory hub specifications.
Specifications
- Lift and gearing: 6-inch portal gear lift; 45% dual idler gearing
- Rotor diameter: 13 inches
- Backing plate: 5/16-inch steel with bent flanges
- Gear box construction: Forged
- Manufacturer part numbers: PGL-645DI-GEN1XP
What's in the Box
- Forged gear boxes
- Dual idler gears
- High-density Kevlar fiber gaskets
- Spindle-shaft oil seals
- Input-shaft triple seal with wiper seal
- Steel backing plates with welded gusset brackets
- 13-inch stainless steel rotors
Fitment
- Polaris General XP 1000 2020 - 2026
Fitment is based on current product data for this part and is not guaranteed on unlisted applications. If you don't see your exact setup, contact us and we'll confirm fitment before you order.
FAQ
Is this gearing intended for large tires?
High Lifter recommends the 45% dual idler gearing for tires measuring 40 inches or larger.
What size are the portal rotors?
The rotors measure 13 inches.
Will the backing plates work with aftermarket control arms?
They work with control arms built to factory hub specifications.
Do the gaskets need additional sealant?
No additional sealant is needed with the high-density Kevlar fiber gaskets.
Is a vent kit standard on these gear boxes?
The boxes have a venting plug; the vent kit is optional.
Why High Lifter
High Lifter adds a second idler gear to spread the portal gear load across twice as many teeth.
Gear Your General XP 1000 for Larger Tires
Shop the High Lifter 6-inch portal gear lift for your two-seat General XP 1000 at Dunes 2 Dezert SXS.