Skip to content

High Lifter 4" 15% Dual Idler Portals Can-Am Maverick X3 (2017-2026)

Sale price $3,955.00

Shipping calculated at checkout

Model
Lift Height
Gear Reduction

In stock

Larger tires can cost the Can-Am Maverick X3 torque, leaving the gearing too high for riders who favor pulling power over speed. Listed for: Can-Am Maverick X3 2017 - 2026. Fitment is not guaranteed on unlisted applications. The High Lifter 4 inch portal gear lift uses a 15% reduction and a second idler gear in each gear box. The dual idlers spread load across more gear teeth.


Key Features

  • Four-inch portal lift with 15% dual-idler gearing
  • Second idler gear spreads load over more gear teeth
  • Forged gear boxes with provision for an optional vent kit
  • 5/16-inch steel backing plates with bent flanges and welded gussets
  • Slotted stainless steel rotors with assembly access holes
  • Two spindle oil seals and a triple input-shaft seal with a wiper

Built To Solve: Maverick X3 Gearing for Larger Tires

  • The 15% portal gear reduction addresses torque lost when larger tires raise the effective gearing.
  • Dual idler gears distribute gear load across twice as many teeth.
  • Gear reduction improves engine braking, reducing reliance on the brakes.
  • Slotted rotors dissipate heat, while access holes help with assembly and disassembly.

Best For: Maverick X3 Riders Choosing Portal Gearing

  • Riders choosing a 15% reduction for larger tires rather than prioritizing speed.
  • X3 owners checking 14-inch or larger wheels against portal backspacing limits.
  • Builders comparing the 33-inch tire guide with the 35-inch guide for forward arms.

Specifications

  • Lift height: 4 inches
  • Backing plate: 5/16-inch steel
  • Tire fitment guide: 33 inches with portals; 35 inches with forward arms. Fitment is not guaranteed.
  • Wheel diameter: 14 inches or larger
  • Factory wheel spacer: 14-inch factory wheels require a 1-inch spacer
  • Wheel backspacing: Maximum 4-1/2 inches for 14- and 15-inch wheels; maximum 5 inches for wheels 16 inches and larger
  • Manufacturer part numbers: PGL-415DI-CMX3

What's in the Box

  • Four portal boxes
  • Dual idler gears
  • High-density Kevlar fiber gaskets
  • Spindle shaft oil seals
  • Triple input shaft seal with wiper seal
  • Steel backing plates
  • Stainless steel rotors

Fitment

  • Can-Am Maverick X3 2017 - 2026

Fitment is based on current product data for this part and is not guaranteed on unlisted applications. If you don't see your exact setup, contact us and we'll confirm fitment before you order.


FAQ

Does the portal lift come with a vent kit?

The vent kit is optional; the gear box has a plug for venting.

Can I use 14-inch factory wheels?

Yes, but 14-inch factory wheels must run a 1-inch spacer. The wheel must also meet the backspacing limit.

How do I choose wheels for these portals?

Use wheels at least 14 inches in diameter. Check backspacing against the limit for the wheel diameter before ordering.

How many portal boxes are supplied?

There are four portal boxes.

Is a 35-inch tire guaranteed to clear with forward arms?

No. The 35-inch figure is a general guide for forward arms, and tire fitment depends on the tire, lift and other modifications.

Does this version fit the 2018 Maverick X3 900 HO?

Yes. The 2018 Can-Am Maverick X3 900 HO is listed for this portal lift.


Why High Lifter

High Lifter's dual-idler design adds a second idler gear to spread the load across more gear teeth.


Choose Maverick X3 Portal Gearing

Check your X3's wheels and tire clearance, then order the High Lifter 4-inch 15% portal lift from Dunes 2 Dezert SXS.

Back to top