High Lifter Can-Am Maverick Sport Portal Gear Lift (2019-2024)
Shipping calculated at checkout
In stock
Large tires can cost a Can-Am Maverick Sport torque, leaving the gearing too high for the power riders want at lower speeds. Listed for: Can-Am Commander 1000R 2021 - 2026; Can-Am Defender HD10 2020 - 2026; Can-Am Defender HD7 2022 - 2026; Can-Am Defender HD9 2022 - 2026; Can-Am Maverick Sport 2019 - 2026. Fitment is not guaranteed on unlisted applications. High Lifter's 6-inch portal gear reduction uses 60% gearing and two idler gears to spread load across more gear teeth and help offset torque loss from larger tires.
Key Features
- 60% gearing intended for large-tire, lower-speed use
- Dual idler gears spread load across twice as many gear teeth
- Forged gear boxes with a plug for an optional vent kit
- High-density Kevlar fiber gaskets require no additional sealant
- Two spindle-shaft oil seals and a triple input-shaft seal
- 5/16-inch steel backing plates with bent flanges and welded gussets
- 13-inch slotted stainless steel rotors with assembly access holes
Built To Solve: Maverick Sport Large-Tire Torque Loss
- The 60% reduction helps offset torque lost when larger tires raise effective gearing.
- Two idler gears spread the load over more teeth in each portal gear box.
- Increased engine braking reduces how often the brakes are needed.
- Slotted rotors help dissipate heat, while access holes ease assembly and disassembly.
Best For: Can-Am Riders Running Large Tires
- Maverick Sport riders choosing 40-inch or larger tires.
- Commander 1000R owners prioritizing lower-speed torque over speed.
- Defender HD7, HD9 and HD10 owners checking a 6-inch portal lift against their model year.
- Riders using control arms built to factory hub specifications.
Specifications
- Lift height: 6 inches
- Idler configuration: Dual idler
- Rotor diameter: 13 inches
- Backing plate thickness: 5/16 inch
- Gear box construction: Forged
- Manufacturer part numbers: PGL-660DI-C1DMC
What's in the Box
- Forged gear boxes
- Dual idler gears
- High-density Kevlar fiber gaskets
- Spindle-shaft oil seals
- Input-shaft triple seal with wiper seal
- Steel backing plates
- Stainless steel rotors
Fitment
- Can-Am Commander 1000R 2021 - 2026
- Can-Am Defender HD10 2020 - 2026
- Can-Am Defender HD7 2022 - 2026
- Can-Am Defender HD9 2022 - 2026
- Can-Am Maverick Sport 2019 - 2026
Fitment is based on current product data for this part and is not guaranteed on unlisted applications. If you don't see your exact setup, contact us and we'll confirm fitment before you order.
FAQ
When is the 60% reduction a good choice?
High Lifter recommends this ratio for tires measuring 40 inches or larger, particularly when low-speed power matters more than speed.
What diameter are the portal rotors?
The rotors measure 13 inches in diameter.
Do the gaskets require additional sealant?
No additional sealant is needed with the high-density Kevlar fiber gaskets.
Will the backing plates work with aftermarket control arms?
They work with control arms built to factory hub specifications.
Does this version fit a 2025 Maverick Sport?
The listed Maverick Sport ranges are 2019-2024 and 2026; 2025 is not listed.
Can the gear boxes be vented?
The boxes have a plug for an optional vent kit, which was described as available soon.
Why High Lifter
High Lifter adds a second idler gear to this portal gear box to spread the load across more gear teeth.
Choose a Can-Am Portal Gear Lift
Check your Can-Am model and year, then order the High Lifter 6-inch portal gear lift from Dunes 2 Dezert SXS.