Skip to content

Can-Am Defender HD10 Mid-Travel Suspension Kit | HCR Racing

Sale price $5,499.99

Shipping calculated at checkout

Color: Raw
Shocks
Ball Joints

In stock

Can-Am Defender HD10 owners looking for a wider stance and room for larger tires can use this HCR mid-travel kit on the specific trims listed below. The Can Am Defender HD10 suspension kit combines boxed high-clearance A-arms, Rhino 2.0 axles, billet tie rods and UHMW bushings. Choose the finish, optional SDi shocks and optional Keller ball joints to match your build.


Key Features

  • 8-inch wider stance over stock track width.
  • HCR lists clearance for 35-inch tires and a 1.5-inch forward offset at the front A-arms.
  • High-clearance boxed front and rear A-arms made from HCR's proprietary alloy.
  • Four Rhino 2.0 axles and premium billet-aluminum tie rods included.
  • Optional SDi Terrain Master 2.1 shocks and Keller ball joints, selected by variant.
  • Made-to-order HCR suspension; confirm current lead time before ordering.

Built To Solve: Defender HD10 Tire Clearance And Suspension Geometry

This Defender suspension upgrade addresses a stock-width setup when your build calls for a wider track and greater tire clearance. Can Am Defender high clearance A arms help reduce low-hanging suspension interference, while the forward offset adds room around the front tires.

  • A stock stance that does not match the wider build you are planning.
  • Limited clearance beneath stock suspension arms on uneven trails.
  • The need to select axles and tie rods as part of a matched UTV suspension kit rather than mix unrelated components.

Best For: Defender HD10 Owners Planning A Wider Trail Build

  • Owners of the listed HD10 and MAX trims building around larger tires.
  • Customers comparing a Can Am Defender lift kit with an HCR Defender mid travel kit and wanting the actual geometry changes spelled out.
  • Buyers considering Defender HD10 suspension for 35 inch tires who can accommodate the added vehicle width.
  • Owners prepared for front and rear sway-bar removal; choose another setup if retaining both bars is a requirement.

Specifications

  • Track-width increase: 8 inches over stock.
  • Front A-arm forward offset: 1.5 inches.
  • Manufacturer-listed tire clearance: 35 inches.
  • Included: four front A-arms, four rear A-arms, four Rhino 2.0 axles, billet-aluminum tie-rod kit, UHMW bushings and hardware.
  • Tie rods: 6061-T6 billet aluminum with PTFE-lined 5/8-inch FK heim joints.
  • Optional shocks: SDi Terrain Master 2.1; not included unless selected.
  • Optional ball joints: Keller; not included unless selected.
  • Finishes: Raw, Black, Green, Red, Desert Tan and Stealth Grey.

Fitment

  • Can-Am Defender HD10 XMR: 2018 and newer.
  • Can-Am Defender HD10 XTP: 2018–2019.
  • Can-Am Defender HD10 Limited: 2024 and newer.
  • Can-Am Defender MAX HD10 XMR: 2019 and newer.
  • Can-Am Defender MAX HD10 Limited, Limited Cab and Lonestar: 2024 and newer.

Installation requires removal of the front and rear sway bars. Confirm exact year, trim, wheel/tire setup and installation requirements before purchase. Fitment is not guaranteed on unlisted models, including other HD10 trims or HD11 applications.


FAQ

What does this Defender suspension upgrade change?

The kit adds 8 inches to the stock track width and uses high-clearance boxed front and rear A-arms. The front arms have a 1.5-inch forward offset, and HCR lists clearance for 35-inch tires.

Is this Can Am Defender lift kit suitable for every HD10?

No. HCR lists specific XMR, XTP, Limited and MAX applications. Confirm your year and trim against the fitment list; HD10 engine designation alone does not establish compatibility.

Does the base kit include SDi shocks or Keller ball joints?

No. Those are optional packages. Choose the shock and ball-joint options explicitly; variants marked None Included do not include that upgrade.

What parts are included in the kit?

The kit includes four front A-arms, four rear A-arms, four Rhino 2.0 axles, a billet-aluminum tie-rod kit, UHMW bushings and a hardware pack.

Do the stock sway bars stay installed?

No. HCR states that installation requires removal of the front and rear sway bars. Check that requirement and the wider track width with your installer before ordering.

Is the kit ready to ship, and should I choose shocks?

HCR states that kits are made to order; confirm current lead time with Dunes 2 Dezert SXS. Compare the base package with the optional SDi Terrain Master 2.1 shock package before choosing.


Why HCR Racing

HCR Racing offers vehicle-specific suspension packages with matched arms, axles and steering components. This Can Am Defender suspension package lets you choose optional shocks and ball joints without treating every configuration as the same kit.


Complete Your Defender HD10 Suspension Build

Select the finish, shock option and ball-joint option before ordering. Verify the listed fitment, added width, sway-bar removal and made-to-order lead time with Dunes 2 Dezert SXS. Ask about compatible service parts for your exact year rather than assuming every Defender accessory fits.

Back to top