Deep snow, mud and rugged ice can make a Polaris Ranger XP 1000 difficult to move across on tires, especially when hauling supplies. Listed for: Polaris Ranger XP 1000 2018 - 2020; Polaris Ranger Crew XP 1000 2019 - 2020. Fitment is not guaranteed on unlisted applications. This UTV track system replaces the wheels with two front and two rear tracks. A large contact patch spreads the machine's weight, while the front Flex-Track design curves inward to help stabilize steering.
Key Features
- Four-season track system for snow, mud, ice and rugged terrain
- Approximately 2,520 square inches of ground coverage
- Front Flex-Track design with a slight inward curve for steering stability
- Foam idler-wheel tires and rubber-mounted shafts cushion impacts
- 1.125-inch track lugs for traction and control
- Carbon steel frame designed to shed snow, mud and debris
- Oil-bath triple hub bearings with stainless sleeves
Built To Solve: Polaris Ranger XP 1000 Traction in Snow and Mud
- Spread vehicle weight across a large track contact patch when working in deep snow.
- Gain approximately 5 inches of average ground clearance compared with tires.
- Reduce steering effort with the system's front-track and steering-stability design.
- Cushion impacts from rocks, downed trees and rugged ice with foam tires and rubber-mounted shafts.
Best For: Polaris Ranger XP 1000 Work and Trail Riders
- Ranger owners hauling supplies or feed through deep snow.
- Ice anglers traveling across snow and ice.
- Ranchers working in mud across changing seasons.
- Riders seeking a side by side track system for rugged terrain.
Specifications
- Ground coverage: Approximately 2,520 sq. in.
- Ground clearance increase: Approximately 5 in. average versus tires
- Drive type: Internal drive
- Frame: Carbon steel
- Track length: Front: 98.5 in.; rear: 116.7 in.
- Track width: Front: 12.5 in.; rear: 14 in.
- Track lug height: Front and rear: 1.125 in.
- Weight: Front: 103 lb; rear: 120 lb; mount kit: approximately 6.25 lb
- Warranty: 2-year limited warranty covering manufacturing defects in materials and workmanship
- Manufacturer part numbers: 6522-05-1551
What's in the Box
- Adapted vehicle mount kit
- Front and rear brackets
- Limiter cables
- Lug nuts
Fitment
- Polaris Ranger XP 1000 2018 - 2020
- Polaris Ranger Crew XP 1000 2019 - 2020
Fitment is based on current product data for this part and is not guaranteed on unlisted applications. If you don't see your exact setup, contact us and we'll confirm fitment before you order.
FAQ
Are any Ranger editions excluded?
HL, BC and Texas Edition models are excluded.
How do the tracks mount to the Ranger?
The adapted mount kit uses front and rear brackets, limiter cables and lug nuts.
Should I consider the 4S1 for year-round use?
Yes. The 4S1 is an all-season side-by-side track system intended for machines from 400 to 1000cc.
How wide are the front and rear tracks?
The front tracks are 12.5 inches wide and the rear tracks are 14 inches wide.
Will the tracks affect the Ranger's speed?
A track system normally reduces speed by about 30%; some vehicles can lose up to 50%.
Does this system fit a 2019 Ranger Crew XP 1000?
Yes. The stated Ranger Crew XP 1000 application covers 2019-2020.
Why CAMSO
Camso's 4S1 uses a curved front Flex-Track design and rubber-mounted shafts to address steering stability and impacts.
Equip Your Polaris Ranger XP 1000 With Tracks
Choose the Camso 4S1 track system for your compatible Ranger XP 1000 at Dunes 2 Dezert SXS.
