Squadron 2.0 Deutsch 4-Pin 55in Splitter Harness | Baja Designs

Running a second Squadron 2.0 light from a single-light harness is impossible without a proper splitter, and reach matters when the lights are far apart. This 4-pin Deutsch splitter turns one Squadron 2.0 feed into two with longer 55-inch legs, so you can power two lights mounted well apart from a single harness.

Key Features

• Splits one Squadron 2.0 feed into two lights
• Long 55-inch legs for widely spaced lights
• Supports up to 2 Squadron 2.0 Pro or 5 Sport
• Rated to 170 watts (about 13A at 13.5V)
• Backlight circuit passthrough supported
• 4-pin Deutsch, one male to two female

Built To Solve: One Harness Feeding Only One Squadron 2.0 Light

• Second light with no way to tap the existing harness
• Lights mounted too far apart for a short splitter
• Backlight circuit not carried to the second light

Best For: Two-Light Squadron 2.0 Setups Spread Apart

• Riders running two Squadron 2.0 lights from one harness
• A-pillar or roof pairs mounted far apart
• Builds expanding from one light to two

Specifications

• Type: 4-pin Deutsch splitter (1 male to 2 female)
• Supports: up to 2 Squadron 2.0 Pro or 5 Sport
• Max power: 170 watts (about 13A at 13.5V)
• Leads: 55 inches per leg, 19 inches after the split
• Backlight: supported
• Switch: not included
• Warranty: Lifetime Limited Warranty

Fitment

Universal Baja Designs accessory compatible with Squadron 2.0 Sport and Pro lights and compatible 4-pin Deutsch lights. This is not vehicle-specific; confirm your light model and connector type before ordering.

FAQ

What does this splitter do?

It splits one Squadron 2.0 harness feed into two, so you can run two lights from a single on/off harness.

How long are the legs?

Each leg is 55 inches, with about 19 inches after the Y-split, for lights mounted far apart.

How many lights can it support?

Up to two Squadron 2.0 Pro or five Sport lights, using additional splitters as needed.

Does it include a switch?

No. It is a splitter only; use it with a Squadron 2.0 relay or on/off harness for switching.

Is it universal?

Yes. It fits any Squadron 2.0 light with a 4-pin Deutsch connector.

Does it carry the backlight circuit?

Yes. Backlight passthrough is supported.

Why Baja Designs

Baja Designs is the Scientists of Lighting, trusted by desert racers for gear that survives real abuse. Their Squadron 2.0 wiring is built to the same standard as their lights and backed by the Baja Designs Lifetime Limited Warranty, so your wiring is as reliable as the lights it powers.

Wire Both Squadron 2.0 Lights Cleanly

This 55-inch splitter is how you power a widely spaced pair of Squadron 2.0 lights from one harness. Pair it with an on/off or 2-light relay harness, add an extension for long runs, and tidy it with a wire hider kit. Order from Dunes 2 Dezert SXS.