All Balls Racing Teryx KRX 1000 & Ridge CV Boot Kit (2020-2026)
Shipping calculated at checkout
In stock
The All Balls Racing rear inner CV boot kit for the Kawasaki Teryx KRX 1000, Ridge and Ridge Crew replaces worn factory parts to cure torn CV boots before dirt and water ruin the joint. It is built to All Balls' application data as a direct replacement, so it goes back in where the original came out and seals the CV joint again so the axle can be saved.
Searching for Kawasaki Teryx KRX 1000 CV boot kit, Kawasaki Teryx KRX 1000 CV boot or Kawasaki Teryx KRX 1000 axle boot? Use the exact-model fitment list below to confirm this kit matches your machine.
Kit contents per All Balls: CV boot x1, stainless steel clamp x2, molybdenum grease.
Key Features
- Compounded from OEM-grade DCR66 rubber formulated for ATV and UTV use, per All Balls
- 40% higher tensile strength than conventional CV boot material, suited to high joint angles
- 50% more abrasion resistant than conventional boot material for long life off-road
- Rubber compound tested to -40°F for flexibility in the cold
- Two stainless steel clamps that tighten without special tools
- Lithium-based molybdenum grease included for long CV joint life
Built To Solve: Worn Kawasaki Teryx KRX 1000, Ridge and Ridge Crew Rear Inner CV Boot Kit Problems
- A torn or cracked CV boot slinging grease
- Dirt and water reaching the CV joint
- A healthy joint at risk because of a cheap boot
- Boots split by sticks, rocks and high joint angles
Best For: Kawasaki Teryx KRX 1000, Ridge and Ridge Crew Owners Rebuilding The Axles
- Teryx KRX 1000 owners replacing a worn rear inner CV boot
- Higher-hour trail and work machines
- Riders who cross water and mud often
- Owners doing their own drivetrain service
Specifications
- Brand: All Balls Racing
- Product type: rear inner CV boot kit
- Contents: CV boot x1
- Contents: Stainless steel clamp x2
- Contents: Molybdenum grease
- Kit type: rear inner CV boot kit
- Position (per All Balls): rear inner
- OEM cross reference (per All Balls): 49006-0613
- Country of origin: China
- Manufacturer Part Number: 19-5051
Fitment
All Balls lists this rear inner CV boot kit for the following UTVs:
- Kawasaki Ridge (2024-2026)
- Kawasaki Ridge Crew (2025-2026)
- Kawasaki Teryx H2 (2026)
- Kawasaki Teryx KRX 1000 (2020-2026)
- Kawasaki Teryx KRX4 1000 (2023-2026)
Position by machine, per All Balls:
- Rear inner: Kawasaki Ridge; Kawasaki Teryx KRX; Kawasaki Teryx KRX4; Kawasaki Teryx4; Kawasaki Teryx5
Fitment is based on the manufacturer's application data. Fitment is not guaranteed on unlisted models; confirm your exact year, model and package before ordering.
FAQ
How do I know my Teryx KRX 1000 CV boot is torn?
Grease slung around the inside of the wheel, a visible split or crack in the boot, and later a clicking joint while turning are the usual signs. Replace the boot before dirt destroys the joint.
What comes in the kit?
All Balls lists one CV boot, two stainless steel clamps and molybdenum grease.
Which models does it fit?
All Balls lists Kawasaki Ridge (2024-2026); Kawasaki Ridge Crew (2025-2026); Kawasaki Teryx H2 (2026); Kawasaki Teryx KRX 1000 (2020-2026); Kawasaki Teryx KRX4 1000 (2023-2026).
Which position does it fit?
All Balls lists this kit for the rear inner position on the machines it covers. Confirm your exact year and model in the fitment list.
Is installation difficult?
The axle comes out of the machine and the CV joint is separated from the shaft so the new boot can slide on. Clean and repack the joint with the supplied grease, then tighten the clamps. All Balls does not publish an install sheet for this part.
Should I replace the boot or the whole axle?
If the joint is still smooth and quiet, a new boot with fresh grease saves the axle. If the joint clicks, binds or has play, replace the axle.
Why All Balls Racing
All Balls Racing specializes in replacement bearings, seals, drivetrain, steering and suspension parts for ATVs and UTVs, packaged by application so the right parts arrive for the job. Its kits are built as direct replacements for the factory parts they cover.
Save Your Teryx KRX 1000 Axle
Confirm your exact year, model and position in the fitment list before ordering. Check the axle joint for play or clicking while it is apart; if the joint is worn, a complete axle is the better buy.
