All Balls Racing Polaris RZR Pro R CV Boot Kit (2022-2026)
Shipping calculated at checkout
In stock
The All Balls Racing CV boot kit for the Polaris RZR Pro R replaces worn factory parts to cure torn CV boots before dirt and water ruin the joint. It is built to All Balls' application data as a direct replacement, so it goes back in where the original came out and seals the CV joint again so the axle can be saved.
Searching for Polaris RZR Pro R CV boot kit, Polaris RZR Pro R CV boot or Polaris RZR Pro R axle boot? Use the exact-model fitment list below to confirm this kit matches your machine.
Kit contents per All Balls: CV boot x1, stainless steel clamp x2, molybdenum grease.
Key Features
- Compounded from OEM-grade DCR66 rubber formulated for ATV and UTV use, per All Balls
- 40% higher tensile strength than conventional CV boot material, suited to high joint angles
- 50% more abrasion resistant than conventional boot material for long life off-road
- Rubber compound tested to -40°F for flexibility in the cold
- Two stainless steel clamps that tighten without special tools
- Lithium-based molybdenum grease included for long CV joint life
Built To Solve: Worn Polaris RZR Pro R CV Boot Kit Problems
- A torn or cracked CV boot slinging grease
- Dirt and water reaching the CV joint
- A healthy joint at risk because of a cheap boot
- Boots split by sticks, rocks and high joint angles
Best For: Polaris RZR Pro R Owners Rebuilding The Axles
- RZR Pro R owners replacing a worn CV boot
- Higher-hour trail and work machines
- Riders who cross water and mud often
- Owners doing their own drivetrain service
Specifications
- Brand: All Balls Racing
- Product type: CV boot kit
- Contents: CV boot x1
- Contents: Stainless steel clamp x2
- Contents: Molybdenum grease
- Kit type: CV boot kit
- Position: varies by machine (see Fitment)
- OEM cross reference (per All Balls): 3239274
- Country of origin: China
- Manufacturer Part Number: 19-5055
Fitment
All Balls lists this CV boot kit for the following UTVs:
- Polaris RZR Pro R (2022-2026)
- Polaris RZR Pro R 4 (2022-2026)
Position by machine, per All Balls:
- Rear inner: Polaris RZR Pro
- Rear outer: Polaris RZR Pro
Fitment is based on the manufacturer's application data. Fitment is not guaranteed on unlisted models; confirm your exact year, model and package before ordering.
FAQ
How do I know my RZR Pro R CV boot is torn?
Grease slung around the inside of the wheel, a visible split or crack in the boot, and later a clicking joint while turning are the usual signs. Replace the boot before dirt destroys the joint.
What comes in the kit?
All Balls lists one CV boot, two stainless steel clamps and molybdenum grease.
Which models does it fit?
All Balls lists Polaris RZR Pro R (2022-2026); Polaris RZR Pro R 4 (2022-2026).
Which position does it fit?
It depends on the machine. All Balls lists it for more than one position across its applications; the position for each machine is listed under Fitment.
Is installation difficult?
The axle comes out of the machine and the CV joint is separated from the shaft so the new boot can slide on. Clean and repack the joint with the supplied grease, then tighten the clamps. All Balls does not publish an install sheet for this part.
Should I replace the boot or the whole axle?
If the joint is still smooth and quiet, a new boot with fresh grease saves the axle. If the joint clicks, binds or has play, replace the axle.
Why All Balls Racing
All Balls Racing specializes in replacement bearings, seals, drivetrain, steering and suspension parts for ATVs and UTVs, packaged by application so the right parts arrive for the job. Its kits are built as direct replacements for the factory parts they cover.
Save Your RZR Pro R Axle
Confirm your exact year, model and position in the fitment list before ordering. Check the axle joint for play or clicking while it is apart; if the joint is worn, a complete axle is the better buy.
