All Balls Racing Polaris RZR 900 & 800 Caliper Rebuild Kit (2008-2026)
Shipping calculated at checkout
In stock
The All Balls Racing brake caliper rebuild kit for the Polaris RZR 900, RZR 800 and General 1000 replaces worn factory parts to cure sticking calipers, leaking seals and weak brakes. It is built to All Balls' application data as a direct replacement, so it goes back in where the original came out and restores firm, consistent braking.
Searching for Polaris RZR 900 caliper rebuild kit, Polaris RZR 900 brake caliper kit or RZR 900 caliper rebuild kit? Use the exact-model fitment list below to confirm this kit matches your machine.
Kit contents per All Balls: boot x3, caliper seal x4, washer x2.
Key Features
- Includes the boots, seals and copper washers All Balls lists to rebuild the caliper, with pad retaining pins where applicable
- Most kits are sold per caliper, per All Balls
- Includes the seal between the caliper halves where applicable
- Zinc-plated pins resist corrosion
Built To Solve: Worn Polaris RZR 900, RZR 800 and General 1000 Brake Caliper Rebuild Kit Problems
- A dragging or sticking caliper
- Brake fluid leaking past worn seals
- Torn dust boots letting in dirt and water
- Uneven pad wear from a sticking piston
Best For: Polaris RZR 900, RZR 800 and General 1000 Owners Rebuilding The Brakes
- RZR 900 owners replacing worn brake caliper seals
- Riders in sand, mud and water who wear brakes fast
- Higher-hour trail and work machines
- Owners doing their own brake service
Specifications
- Brand: All Balls Racing
- Product type: brake caliper rebuild kit
- Contents: Boot x3
- Contents: Caliper seal x4
- Contents: Washer x2
- Kit type: brake caliper rebuild kit
- Position: varies by machine (see Fitment)
- Country of origin: United States
- Manufacturer Part Number: 18-3187
Fitment
All Balls lists this brake caliper rebuild kit for the following UTVs:
- Polaris General 1000 (2017-2026)
- Polaris RZR 570 (2012-2020)
- Polaris RZR 800 (2008-2014)
- Polaris RZR 900 (2015-2020)
- Polaris RZR 900 Trail (2021-2026)
- Polaris RZR S 800 (2009-2014)
- Polaris RZR S 1000 60 inch (2016-2021)
- Polaris RZR S 900 60 inch (2015-2020)
- Polaris RZR 570 Trail (2021-2022)
- Polaris RZR Trail S 1000 (2021-2026)
- Polaris RZR Trail S 900 (2021-2025)
Position by machine, per All Balls:
- Front: Polaris RZR 570; Polaris RZR 800; Polaris RZR S
- Rear: Polaris General 1000; Polaris RZR 1000; Polaris RZR 900
All Balls also lists this part for some ATV models; D2D lists UTV fitment only.
Fitment is based on the manufacturer's application data. Fitment is not guaranteed on unlisted models; confirm your exact year, model and package before ordering.
FAQ
How do I know my RZR 900 caliper needs a rebuild?
A caliper that drags or sticks, a pad that wears unevenly, fluid weeping around the pistons, or a torn dust boot are the usual signs.
What comes in the kit?
All Balls lists three boots, four caliper seals and two washers.
Which models does it fit?
All Balls lists Polaris General 1000 (2017-2026); Polaris RZR 570 (2012-2020); Polaris RZR 800 (2008-2014); Polaris RZR 900 (2015-2020); Polaris RZR 900 Trail (2021-2026); Polaris RZR S 800 (2009-2014); Polaris RZR S1000 (2016-2021); Polaris RZR S900 (2015-2020); Polaris RZR Trail (2021-2022); Polaris RZR Trail S 1000 (2021-2026); and more, see the full fitment list below.
Which position does it fit?
It depends on the machine. All Balls lists it for more than one position; the position for each machine is listed under Fitment.
Is installation difficult?
The caliper comes off and is disassembled so the pistons can be removed and the seals and boots replaced. Clean the bore, reassemble, and bleed the brakes. All Balls does not publish an install sheet for this part.
Should I replace the pistons too?
If the pistons are pitted, corroded or cracked, replace them with a stainless piston kit while the caliper is apart.
Why All Balls Racing
All Balls Racing specializes in replacement bearings, seals, brake, drivetrain, steering and suspension parts for ATVs and UTVs, packaged by application so the right parts arrive for the job. Its kits are built as direct replacements for the factory parts they cover.
Complete Your RZR 900 Brake Service
Confirm your exact year, model and position in the fitment list before ordering. Inspect the pads, rotors, caliper seals and fluid at the same time, and bleed the brakes with fresh fluid after any hydraulic work.
