Can-Am X3 Roll Cage Mounts – C Pillar 4-Seater | AJK Offroad
Shipping calculated at checkout
In stock
AJK Offroad Can-Am X3 Roll Cage Mounts – C Pillar (4-Seat)
The AJK Offroad Can-Am X3 Roll Cage Mounts for the C pillar are 3/16" CNC laser cut steel plates that bolt to the rear C pillar cage location on the 4-seat Maverick X3 Max using factory hardware. Sold as a set of 2 (one per side), these plates add a reinforced mounting surface at the rear cage area for harness anchors, accessory brackets, and other rear-cage mounting needs. Made in the USA by AJK Offroad.
Key Features & Benefits
- C Pillar / Rear Cage Position — Designed for the rear cage node on 4-seat X3 Max models — the location most commonly used for rear passenger harness anchors and rear accessory mounts
- 3/16" CNC Laser Cut Steel — Heavy-gauge mounting plate for a rigid, dependable connection at the rear cage
- Bolt-On — Uses Factory Hardware — No drilling, no welding, no cage modification
- Sold as a Set of 2 — Driver and passenger C pillar plates included
- 4-Seat X3 Max Specific — The C pillar cage position only exists on the 4-seat X3 Max platform
- Made in USA — CNC laser cut by AJK Offroad
Specs & Fitment
| Spec | Detail |
|---|---|
| Material | 3/16" CNC laser cut steel |
| Sold As | Set of 2 (one per side) |
| Installation | Bolt-on — factory cage hardware |
| Welding Required | No |
| Manufacturer | AJK Offroad — Made in USA |
Vehicle Fitment — Can-Am:
- Maverick X3 Max (4-seat models only, all years)
Frequently Asked Questions
Do I need these for a 2-seat X3?
No — the C pillar cage position only exists on the 4-seat X3 Max. 2-seat X3 owners should look at the A pillar and B pillar cage mounts listed separately on the site.
What is the C pillar mount most commonly used for?
The C pillar is the rear cage position on the X3 Max — most commonly used for rear passenger harness anchors, rear accessory brackets, and rear audio mounts on 4-seat builds with full cage accessory setups.
Can I run A, B, and C pillar mounts simultaneously?
Yes — all three pillar mount sets are independent and can be run together on the same 4-seat X3 Max for a fully outfitted cage accessory setup.
Is additional hardware needed?
No — the plates use existing factory cage hardware. Nothing additional is needed for the basic bolt-on installation.
Are these compatible with both 2019-and-older and 2020-and-newer X3 Max models?
Contact the team at Dunes 2 Dezert SXS to confirm year-specific fitment for your X3 Max model year before ordering.
Complete your 4-seat Can-Am X3 Max cage setup with the AJK Offroad X3 C Pillar Cage Mounts — available now at Dunes 2 Dezert SXS, your Desert Southwest source for Can-Am Maverick X3 Max accessories and AJK Offroad cage hardware.
