These are the clamps that come on a lot of UTV Zilla roofs and glass windshields. Buy a pack when you add a part, lose one, or want a spare set.
Four rubber-coated clamps per pack, 3/4" wide, in either a 1.75" or a 2" diameter.
The rubber coating is the whole point - it is what stops the panel buzzing against the cage tube. A bare steel clamp transmits every vibration straight into the roof.
Pick the diameter to match your cage, not your preference. The wrong size will not hold.
Key Features
- Four rubber-coated clamps per pack
- 3/4" wide
- Available in 1.75" or 2" diameter
- Thick rubber coating to damp out vibration
Built To Solve
- A roof or windshield drumming against the cage
- A clamp lost or cracked during an install
- Replacing bare metal clamps that rattle
Best For
Anyone fitting or re-fitting a UTV Zilla roof, glass windshield or rear glass panel, or replacing a clamp that has gone missing.
Specifications
- Four rubber-coated clamps per pack
- 3/4" wide
- Available in 1.75" or 2" diameter
- Thick rubber coating to damp out vibration
Fitment
UTV Zilla states they use the 1.75" clamps on:
- Rear Glass Window for RZR XP 1000, Turbo
- Full Glass Windshield for 2019 RZR XP 1000, Turbo
- Full Glass Windshield for Can-Am Maverick X3
- RZR 570, 800, XP900 Full Glass Windshield
- Full Glass Windshield for RZR 900, 1000, Turbo
- Hard Plastic and Tinted and Aluminum Roofs for RZR 900, 1000, Turbo (2 and 4 seat)
And the 2" clamps on: Vented Full Glass Windshield for Honda Talon, and the Hard Plastic Roof for RZR Pro XP in both 2 seat and 4 seat.
Measure your cage before ordering. The two sizes are not interchangeable, and the pack you need depends on the tube, not the machine.
Returns carry a restocking fee and return shipping. Anything installed, or with the protective film removed, cannot be returned.
Warranty claims need photos emailed within 5 business days of delivery.
California Proposition 65: this product can expose you to chemicals known to the State of California to cause cancer and reproductive harm.
Not sure this is the right part? Email sales@dunes2dezertsxs.com before ordering and we will check rather than guess.
UTV Zilla does not publish an installation sheet for this item, so we are not attaching one. If you want a hand with the fit, email sales@dunes2dezertsxs.com.
FAQ
Which size do I need?
Measure the cage tube the part clamps to. UTV Zilla uses 1.75" clamps on the RZR 900, 1000 and Turbo roofs and glass, and 2" clamps on the PRO XP plastic roofs and the Honda Talon glass windshield. If you are unsure, measure rather than guess.
How many come in a pack?
Four clamps. No bolts or washers are listed with them, so if you need hardware too, the billet clamp pack ships with bolts and washers included.
Why rubber coated instead of plain steel?
Vibration. A bare clamp passes every bit of chassis buzz into the panel it is holding, which is how roofs start drumming and polycarbonate starts cracking at the mount.
Can I use these instead of billet clamps?
They do a different job. Rubber-coated clamps wrap the tube and damp vibration. The billet clamps are a machined mount with two threaded holes you bolt accessories to.
Are these made in the USA?
UTV Zilla does not state a country of origin for these clamps, so we are not going to claim one. Their roofs and windshields do say made in the USA; this pack does not.
Why UTV Zilla
They are the hardware UTV Zilla specifies on their own roofs and windshields, so the fit and the rubber thickness are what the panel was designed around.
Order From Dunes 2 Dezert SXS
We ship UTV Zilla direct from the manufacturer. Questions on fitment, finish or lead time go to sales@dunes2dezertsxs.com and a person who rides answers them.
