The KFI 4-inch leveling kit raises the push tube attachment point 4 inches for lifted machines, so your Pro 2.0 push tube runs level and the blade cuts flat. KFI lists it for machines that measure about 15 to 16 inches at the mount (the install sheet chart shows 14 to 16 inches), on the square Pro 2.0 106300 push tube.
A push tube that runs uphill or downhill tips the blade, wears the cutting edge unevenly and makes the plow dig or ride up. Measure your machine first, then pick the kit that matches.
This UTV plow lift kit (or UTV snow plow lift, depending on what you searched) goes between the KFI push tube and the mount. It fits the square UTV plow push tube only. KFI plow parts and other UTV snow plow accessories and UTV snow plow parts like this keep a KFI snow plow or KFI UTV plow working on UTV snow plows of every size; they are sold separately from the push tube, blade and mount, so you add only the UTV plow accessories your setup needs.
Key Features
- +4-inch change at the push tube attachment point
- Made for the KFI Pro 2.0 106300 square push tube
- Included: two 4-inch gusset plates, two spacers, two 4-inch level ears, a level kit rod and hardware kit HK-446
- Reuse the ear hardware from the 106300 kit, or add hardware kit HK-398.
Built To Solve: A Plow Blade That Will Not Sit Level
- Push tube angled because the machine is lifted, lowered or on bigger tires
- Blade digging in at the front or riding on its top edge
- Uneven cutting edge and wear bar wear
Best For: Pro 2.0 Push Tube Owners on Modified or Unusual-Height UTVs
- Owners with lift kits, oversize tires, tracks or High Lifter editions
- Owners whose machine sits low at the mount
- Anyone KFI's application chart sends to a leveling kit
Specifications
- Product type: UTV push tube leveling kit
- Brand: KFI
- Offset: +4 inch
- KFI machine height range: 15 to 16 inches
- Included: two 4-inch gusset plates, two spacers, two 4-inch level ears, a level kit rod and hardware kit HK-446
- Manufacturer Part Number: 106324
Fitment
Works with:
- KFI Pro 2.0 UTV push tube 106300 (square tube)
For the discontinued round 105635 tube, KFI sells 105700 (2-inch) and 105705 (4-inch) instead. KFI's full range: -1 inch 106320, 1-2 inch 106322, 4 inch 106324, 6 inch 106326. Fitment is not guaranteed on unlisted setups.
FAQ
Which leveling kit do I need?
Measure your machine at the mount and use KFI's chart: about 8.5-9.5 inches for -1 (106320), 12-14 for 1-2 inch (106322), 15-16 for 4 inch (106324), 17-18 for 6 inch (106326).
Does it fit the old round push tube?
No. It is for the square Pro 2.0 106300 tube. Round 105635 tubes use 105700 or 105705.
Why does the blade need to be level?
A level push tube keeps the cutting edge flat, so it scrapes evenly instead of digging in or riding up.
Is hardware included?
Yes: two 4-inch gusset plates, two spacers, two 4-inch level ears, a level kit rod and hardware kit HK-446. Reuse the ear hardware from the 106300 kit, or add hardware kit HK-398.
My application chart says J. Is this the kit?
A J note on a KFI chart calls for the 2-inch kit: 106322 on Pro 2.0 tubes or 105700 on round tubes.
Why KFI
KFI (Kappers Fabricating) designs and builds winch mounts, plow mounts and complete UTV plow systems in the USA, sells replacement parts for its plows, and publishes installation instructions for its parts.
Level Your KFI Pro 2.0 Plow
Order the KFI 4-inch leveling kit after you measure your machine against KFI's chart. Order from Dunes 2 Dezert SXS.
