SuperATV Yamaha Wolverine RMAX 1000 High-Clearance Rear A-Arms give your Yamaha Wolverine RMAX 1000 1.5 inches of extra ground clearance. Built from 1.5-inch tubing that is stronger than the stock arms, and a UV-resistant powder coat finish keeps them looking good after hard rides on trails, farm roads and washouts.
They bolt to your Yamaha Wolverine RMAX 1000 with the published install instructions, so you spend more time riding and less time in the garage. The adjustable upper pivot block lets you dial in camber after adding a lift or bigger tires.
This SuperATV High-Clearance set is built specifically for the Yamaha Wolverine RMAX 1000 models listed below, so the geometry matches your machine.
Key Features
- Adds 1.5" of ground clearance
- 1.5" tubing
- Adjustable upper pivot block for full camber adjustability
- Includes high-quality HDPE bushings at no extra cost
- UV-resistant powder coat finish
- Backed by a lifetime warranty
Built To Solve: Stock Arms Holding Your Wolverine RMAX 1000 Back
- Stock rear arms that drag on rocks, stumps and logs
- Low ground clearance under the rear of the machine
- Bent stock arms that need a stronger replacement
- Camber that drifts out of spec after a lift or bigger tires
Best For: Yamaha Wolverine RMAX 1000 Owners
- Yamaha Wolverine RMAX 1000 owners (2021-2024)
- Trail riders adding clearance
- Riders who want a lifetime warranty on their suspension arms
Specifications
- Added ground clearance: 1.5 inches
- Tubing: 1.5-inch steel
- Camber adjustment: adjustable upper pivot block
- Bushings: HDPE bushings included
- Finish: UV-resistant powder coat
- Warranty: lifetime warranty on the A-arms against manufacturing defects to the original purchaser; ball joints and tie rod ends are wear items and are not covered by the lifetime warranty
- Manufacturer Part Number (RMAX 4 Compact): AA-Y-RMAX4-R-HC-02
- Manufacturer Part Number (RMAX 2 ): AA-Y-RMAX-R-HC-001-02
- Included: a rear A-arm set for both sides with HDPE bushings. Anything not listed here, such as axles or tie rods unless noted, is not included.
- Installation instructions: AA-Y-RMAX-R-HC (PDF), AA-Y-RMAX4-R-HC (PDF)
Fitment
- Yamaha Wolverine RMAX 2 1000 (2021-2024)
- Yamaha Wolverine RMAX 4 1000 Compact (2021-2024)
SuperATV lists these applications by model and year. Fitment is not guaranteed on models or years not listed above; confirm your exact model before ordering.
FAQ
Which machines does this fit?
The Yamaha Wolverine RMAX 1000 models and years listed in the fitment section above (2021-2024). Confirm your exact model before ordering.
How much ground clearance do they add?
About 1.5 inches over the stock arms, thanks to the high-clearance bend.
Are bushings included?
Yes. HDPE bushings are included.
Can I adjust camber?
Yes. The adjustable upper pivot block lets you set camber, and SuperATV presets them to stock specs.
What warranty do they carry?
SuperATV backs the A-arms with a lifetime warranty against manufacturing defects to the original purchaser. Ball joints and tie rod ends are wear items and are not covered by the lifetime warranty.
Why SuperATV
SuperATV designs and tests its A-arms in-house, publishes model-specific install instructions and backs the arms with a lifetime warranty against manufacturing defects. Dunes 2 Dezert SXS ships SuperATV suspension parts nationwide.
Upgrade Your Wolverine RMAX 1000 Suspension
Confirm your Yamaha Wolverine RMAX 1000 model and year above, choose your options and add the A-arms to your cart.
