The SuperATV Honda Pioneer 1000 Rear Windshield closes off the back of the three-seat Pioneer 1000 cab, blocking flying mud and debris and eliminating the suction that pulls dust in when you run a front windshield on its own. It is 1/4-inch light tint polycarbonate with a rubber bulb seal and steel brackets, and it removes and reinstalls in minutes.
This honda pioneer 1000 rear window fits the Pioneer 1000 from 2016 through 2025 only; it does not fit the 1000-5. As a honda pioneer 1000 rear windshield, it pairs with any front windshield to finish the cab, so a honda pioneer rear windshield or pioneer 1000 rear windshield shopper gets rear protection without a full enclosure. The superatv honda pioneer 1000 rear windshield is a utv rear windshield cut from a tinted rear windshield panel of the same polycarbonate windshield material SuperATV uses up front.
Key Features
- Protects against flying mud and debris
- Eliminates suction that occurs with a front windshield on its own
- 1/4-inch light tint polycarbonate, rated by SuperATV at 250x stronger than glass and 25x stronger than acrylic
- Rubber bulb seal keeps air and moisture out
- Steel brackets prevent rattling
- Removes and reinstalls in minutes
Built To Solve: Dust Pulled Into a Pioneer 1000 Cab From Behind
- Dust and dirt sucked in behind a front windshield
- Mud and debris thrown up by the rear tires
- Cold air at the back of the cab
- Rattling panels on rough trails
Best For: Three-Seat Pioneer 1000 Owners Running a Front Windshield
- Owners who already run a full, vented, flip or glass front windshield
- Riders in dusty or muddy conditions
- Pioneer 1000 (three-seat) owners with 2016-2025 machines
- Pioneer 1000-5 owners: this model does not fit
Specifications
- Material: 1/4-inch light tint polycarbonate (SuperATV rates it 250x stronger than glass and 25x stronger than acrylic)
- Sealing: rubber bulb seal
- Mounting: steel brackets
- Removal: removes and reinstalls in minutes
- Origin: Made in the USA (stated by SuperATV)
- Warranty: 1 year (stated by SuperATV)
- Manufacturer Part Number: RWS-H-PIO1K-76
Fitment
- Honda Pioneer 1000 (2016-2025)
Does NOT fit the Pioneer 1000-5. Not compatible with Honda cab enclosure doors. Not compatible with OEM roofs. Can be used with most soft or hard tops.
SuperATV lists these applications by model and year. Fitment is not guaranteed on models or years not listed above, or on machines with modified cages; confirm your exact model before ordering.
FAQ
Does it fit the Pioneer 1000-5?
No. SuperATV lists it for the Pioneer 1000 (2016-2025) only and states it does not fit the 1000-5 model.
Why add a rear windshield?
Running a front windshield alone creates suction that pulls dust into the cab. A rear windshield eliminates it and blocks mud thrown from behind.
Will it work with my roof or cab doors?
It can be used with most soft or hard tops, but SuperATV lists it as not compatible with OEM roofs or Honda cab enclosure doors.
Is it tinted?
Yes. It is 1/4-inch light tint polycarbonate.
Can I take it off?
Yes. SuperATV says the whole thing can be removed and reinstalled in minutes.
Why SuperATV
SuperATV designs its windshields in-house and manufactures them at its facility in Madison, Indiana, cutting each one to the machine and backing it with a 1-year warranty. Dunes 2 Dezert SXS ships SuperATV parts nationwide, so you get a vehicle-specific Honda Pioneer 1000 fit without hunting across sites.
Complete Your Honda Pioneer 1000 Cab
Confirm you have a three-seat Pioneer 1000 (2016-2025) and check your roof and doors against the notes above. Pair it with a SuperATV Pioneer 1000 full, vented, flip or glass front windshield to seal the cab front and back.
