The SuperATV 4" GDP Portal Gear Lift for the 2023+ CFMOTO ZForce 950 HO EX lifts the machine 4 inches at the hubs and adds a 15% or 30% gear reduction. Choose cast aluminum or billet aluminum housings to match how you ride. The gear reduction in each hub relieves stress on your drivetrain, so you can run bigger tires without overworking axles and the transmission.
Key Features
- Available with billet or cast aluminum housing
- Cool, quiet, precision-ground gears made from 9310 alloy billet steel
- Increases width by 4" per side (8" total)
- 1.5" diameter 4340 hardened steel drive shaft
- No leak bearings and seals
- Universal hubs can be set up to work with the following bolt patterns: 4/156, 4/137, 4/115, and 4/110
- Comes complete with all hardware, backing plates, brakes lines and instructions
- Limited lifetime warranty from the manufacturer
Built To Solve: ZForce 950 HO Clearance And Big-Tire Problems
- Not enough ground clearance for rocks, ruts and ledges
- Bigger tires that bog the machine down
- Extra strain on axles, differential and transmission from oversized tires
Best For: CFMOTO ZForce 950 HO Owners
- CFMOTO ZForce 950 HO owners (2023+) stepping up to bigger tires
- Mud, rock and trail riders who want more clearance and low-end torque
- Owners who want a portal lift instead of a tall suspension lift
Specifications
- Lift: 4 inches at the hubs
- Gear reduction options: 15%, 30%
- Housing options: cast aluminum, billet aluminum
- Wheel requirements (per the manufacturer): 14" or larger wheel required; wheels cannot exceed 5" backspacing; not compatible with dual beadlock wheels; wheels need to have a center hole of at least 3.25" (82.55mm) or require a 1" wheel spacer
- Warranty: Limited Lifetime warranty from the manufacturer against manufacturing defects to the original purchaser
- Included (per the manufacturer): (4) Assembled portal hub complete with 9310 gears, seals, output shaft, advanced gaskets, and thrust bearings; (4) Universal hubs and stainless steel slotted rotors with lugs; (4) Specialized steel alloy backing plates; (4) Steel caliper mounting plates; (1) Front caliper adapter; (1) Rear caliper adapter; (6) Shims; (1) Short left front brake line; (1) Long right front brake line; (2) Rear brake line extensions; (1) Short left front parking brake; (1) Long right front parking brake; All required hardware, including recessed castle nut socket. A frame stiffener is not included. Anything not listed here is not included.
- Installation instructions: PGH-10-111-301 (PDF)
Tire Size Guide
Per the manufacturer, measured at full compression and full turn:
- 32": Stock Suspension with OEM Nerf Bar
- 36": Stock Suspension without OEM Nerf Bar
- 36": SATV Forward A-Arms with OEM Nerf Bar
- 39": SATV Forward A-Arms without OEM Nerf Bar
Fitment
- CFMOTO ZForce 950 HO EX (2023+)
The manufacturer lists these applications by model and year. Fitment is not guaranteed on models or years not listed above; confirm your exact model before ordering.
FAQ
Which machines does this fit?
The CFMOTO ZForce 950 HO models and years listed in the fitment section above (2023+). Confirm your exact model before ordering.
Which gear reduction should I choose?
Higher reductions (30%) add the most low-end torque for big tires, mud and rocks. Lower reductions (15%) keep more of your top speed. The tire size guide on this page lists the manufacturer recommendations.
What tire size can I run?
The manufacturer lists tire sizes by suspension setup in the tire size guide above. The largest size listed is 39" with SATV Forward A-Arms without OEM Nerf Bar.
What wheels do I need?
14" or larger wheel required; wheels cannot exceed 5" backspacing; not compatible with dual beadlock wheels; wheels need to have a center hole of at least 3.25" (82.55mm) or require a 1" wheel spacer.
Are install instructions available?
Yes. The manufacturer installation instructions are linked on this page.
Why SuperATV
SuperATV builds GDP portals with 9310 steel alloy gears and has a dedicated portal support team. Dunes 2 Dezert SXS ships SuperATV portals nationwide.
Upgrade Your ZForce 950 HO
Confirm your CFMOTO ZForce 950 HO model and year above, choose your housing and gear reduction, and add it to your cart.
