SuperATV Can-Am Defender HD10 Atlas Pro BFT Suspension Kit replaces the front A-arms on your Can-Am Defender HD10 with SuperATV's BFT design, which combines lift, forward offset and high-clearance bends so you can run larger tires. Manufacturer highlights: Fit 34" tires with minimal lift; 2" forward offset A-arms; Made with 1.5" x .138" wall steel DOM tubing.
If you are shopping for defender suspension kit, this SuperATV BFT suspension kit is built for the Can-Am Defender HD10 models listed below. It is also the right match if you searched for can am defender suspension.
Key Features
- Fit 34" tires with minimal lift
- 2" forward offset A-arms
- Made with 1.5" x .138" wall steel DOM tubing
- 0.5" larger than stock
- 0.25" larger than our standard
- High-Clearance 2" Offset A-Arms
- 2" of lift
- High-clearance - 1.5" of additional clearance
- Full camber adjustability
- Pivot blocks pre-adjusted to factory length
- Reinforced shock mounts
- Includes all 4 front A-arms
- Does not come with bushings - can be used with OEM or SuperATV bushings
- Can be used with OEM or aftermarket ball joints
- UV-Resistant powder coat finish
Built To Solve: Defender HD10 Suspension Problems
- Not enough tire clearance for larger tires
- Stock A-arms that bend on hard hits
- Limited ground clearance under the front end
Best For: Can-Am Defender HD10 Owners
- Can-Am Defender HD10 owners (2016-2019) running bigger tires
- Work and trail riders who want more clearance
- Owners replacing bent stock A-arms
Specifications
- Material: DOM steel tubing
- Preinstalled Ball Joints options: Super Duty 300M, Heavy-Duty 4340 Chromoly Steel, Standard Duty, Keller Performance, None (Reuse Existing Ball Joints)
- Warranty: Lifetime warranty from the manufacturer against manufacturing defects to the original purchaser (per the manufacturer)
- Manufacturer Part Number (Super Duty 300M): AA-CA-DEF-BFT-001-BSD-02#HD10
- Manufacturer Part Number (Heavy-Duty 4340 Chromoly Steel): AA-CA-DEF-BFT-001-BH-02#HD10
- Manufacturer Part Number (Standard Duty): AA-CA-DEF-BFT-001-BS-02#HD10
- Manufacturer Part Number (Keller Performance): AA-CA-DEF-BFT-001-BK-02#HD10
- Manufacturer Part Number (None (Reuse Existing Ball Joints)): AA-CA-DEF-BFT-001-02#HD10
- Included: the front A-arms for the ball joint option you select. Per the manufacturer: Includes all 4 front A-arms. Anything not listed here is not included.
- Installation instructions: AA-CA-DEF-2-HC-3513 (PDF)
Fitment
- Can-Am Defender HD 10 (2016-2019)
- Can-Am Defender HD 10 DPS (2016-2019)
- Can-Am Defender HD 10 XT (2016-2019)
- Can-Am Defender HD 10 XT Cab (2016-2017)
- Can-Am Defender HD 10 XTP (2018-2019)
- Can-Am Defender HD 10 Mossy Oak (2018-2019)
- Can-Am Defender MAX HD 10 (2017-2019)
- Can-Am Defender MAX HD 10 DPS (2017-2019)
- Can-Am Defender MAX HD 10 XT (2017-2019)
- Can-Am Defender MAX HD 10 XT Cab (2017)
15" wheel or larger is required to run Keller Ball Joints.
The manufacturer lists these applications by model and year. Fitment is not guaranteed on models or years not listed above; confirm your exact model before ordering.
FAQ
Which machines does this fit?
The Can-Am Defender HD10 models and years listed in the fitment section above (2016-2019). Confirm your exact model before ordering.
Is there anything I should know before ordering?
15" wheel or larger is required to run Keller Ball Joints.
What does the ball joint option mean?
You can order the arms with SuperATV ball joints preinstalled in the grade you choose, or choose None and reuse your existing ball joints.
Are install instructions available?
Yes. The manufacturer installation instructions are linked on this page.
Why SuperATV
SuperATV designs its suspension parts for specific machines and publishes model-specific install instructions. Dunes 2 Dezert SXS ships SuperATV suspension parts nationwide.
Upgrade Your Defender HD10 Suspension
Confirm your Can-Am Defender HD10 model and year above, choose your options and add it to your cart.
