RPM Powersports Maverick R Brushless Intercooler Fans & Shroud Kit
Shipping calculated at checkout
In stock
The RPM Powersports brushless intercooler fan and shroud kit keeps Can-Am Maverick R intake air temperatures in check with 4,250 CFM of total airflow, soft-start motors and a 15 amp maximum draw per fan, installed in the stock location with factory plug-and-play connectors.
Cool charge air is the biggest factor in holding peak horsepower, and maverick r heat soak shows up fast in desert washes, dunes or on high-boost tunes. These maverick r brushless fans pull far more air across the maverick r intercooler core, lowering maverick r intake air temps without straining the stator or battery.
The intercooler fan shroud is 3 mm aluminum, CNC laser-cut, bent and powder-coated for trail durability. As a maverick r fan upgrade and a direct can am maverick r cooling improvement, this maverick r intercooler fan kit is one of the simplest maverick r performance parts to install. Every rpm maverick r fans kit uses a brushless intercooler fan design with integrated soft-start electronics.
Key Features
- 4,250 CFM total airflow from high-RPM brushless motors
- 15 amp maximum draw per fan to protect the stator and battery
- Integrated soft-start electronics prevent electrical spikes
- 3 mm CNC laser-cut, bent and powder-coated aluminum shroud
- Plug and play with factory connectors
- Mounts in the stock intercooler fan location, no modification
Built To Solve: Maverick R Heat Soak and Rising Intake Air Temps
- Power fade from heat soak in hot conditions
- High intake temps on tuned or high-boost machines
- Stock fans that cannot move enough air at low speed
- Hard electrical surges from fan start-up
- Flimsy shrouds that crack on the trail
Best For: Tuned and Hot-Climate Can-Am Maverick R Owners
- Maverick R owners running a tune or raised boost
- Desert and dune riders in high ambient heat
- Slow technical riders where airflow over the core is low
- Owners who want a plug-and-play cooling upgrade
- Builds pairing it with the RPM Maverick R fan override kit
Specifications
- Brand: RPM Powersports
- Airflow: 4,250 CFM total
- Current draw: 15 A max per fan
- Motors: (2) high-RPM brushless with soft start
- Shroud: 3 mm powder-coated aluminum
- Included: shroud, (2) fan motors, factory connector pigtails, stainless hardware
- Replaces: Can-Am Maverick R stock fan assembly 707801008
- Manufacturer Part Number: INK-CA-4
Fitment
Fits the Can-Am Maverick R and Maverick R MAX with stock intercooler fan assembly 707801008, per RPM Powersports. Fitment is not guaranteed on applications not listed here; confirm your model before ordering.
FAQ
How much airflow do the RPM Maverick R intercooler fans move?
The two brushless fans move 4,250 CFM of total airflow across the intercooler core.
Will these fans overload my electrical system?
Each fan is capped at 15 amps maximum and uses soft-start electronics to avoid sudden electrical surges.
Do I need to cut or rewire anything?
No. The kit mounts in the stock location and plugs into the factory connectors.
What stock part does this replace?
It replaces the Can-Am Maverick R stock fan assembly, part 707801008.
Will cooler intake temps add power?
Lower intake air temperature helps the engine hold peak power instead of fading from heat soak, especially on tuned machines.
Can I run the fans on demand?
Pair the kit with the RPM Maverick R fan override kit to switch the fans on manually.
Why RPM Powersports
RPM Powersports develops its Maverick R cooling parts in-house and tests them in desert and dune heat, where intake temperature control matters most.
Keep Your Maverick R Running Cool
Order the RPM brushless intercooler fan and shroud kit from Dunes 2 Dezert SXS. Contact our team with any fitment questions.
