XTC Kawasaki KRX 1000 Turn Signal Kit (2020-2027)

A Kawasaki KRX 1000 turn signal left on after a turn can keep flashing until the driver remembers to cancel it. A timed signal also needs to stay active while the machine is stopped with the brakes applied. Listed for: Kawasaki Teryx KRX 1000 2020 - 2027; Kawasaki Teryx KRX4 1000 2020 - 2027. Fitment is not guaranteed on unlisted applications. The self-canceling controller runs an 8-, 20- or 75-second signal cycle and pauses the countdown while the brakes are applied. Its vehicle-specific harness plugs inline with the factory rear light harness.

Key Features

• Three self-canceling signal cycles: 8, 20 and 75 seconds
• Smart Brake Hold pauses the countdown while the brakes are applied
• Rocker switch signals can be canceled manually with a second press
• Inline connection to the factory rear taillight harness
• Opposite rear brake light remains functional while the signal flashes
• Hazard and horn controls on one rocker switch
• Rear auxiliary power output for license plate or whip lights
• Choice of sequential X-LITE DRL or standard 3/4-inch front marker lights

Built To Solve: Kawasaki KRX 1000 Signal Cancellation

• Select a timed signal cycle with a short press or a longer hold of the rocker switch.
• Keep the signal countdown paused while holding the brakes at a light.
• Cancel the signal early by pressing the rocker switch again.
• Use the factory rear lights for signaling through the inline harness.
• Activate the hazards or FIAMM horn from the separate rocker control.

Best For: Kawasaki KRX 1000 Riders Adding Signals

• Drivers who want the signal timer to pause under braking
• KRX riders who want to use the factory rear lights for turn signals
• Owners choosing between sequential X-LITE DRL and standard front markers

Specifications

• Signal timer settings: 8, 20 or 75 seconds
• Front marker options: Sequential X-LITE DRL or standard 3/4-inch front marker lights
• Rear auxiliary output: For license plate or whip lights
• Manufacturer part numbers: ATS-KAW-SV3 (Rocker Switch), ATS-L-KAW-SV3 (Billet Lever)

What's in the Box

• LED-lit turn signal rocker switch
• Hazard/horn rocker switch
• FIAMM horn
• Vehicle-specific rear taillight harness

Fitment

• Kawasaki Teryx KRX 1000 2020 - 2027
• Kawasaki Teryx KRX4 1000 2020 - 2027

Fitment is based on current product data for this part and is not guaranteed on unlisted applications. If you don't see your exact setup, contact us and we'll confirm fitment before you order.

FAQ

How long can the turn signal run before it cancels?

The rocker switch selects an 8-, 20- or 75-second cycle. A quick press selects eight seconds; longer holds select the other cycles.

How does the harness connect to the rear lights?

It plugs inline with the factory rear taillight harness. The opposing brake light continues to work while the selected side flashes.

Does installation require cutting or crimping wires?

No. The vehicle-specific connection is described as requiring no wire cutting or crimping.

What happens to the signal timer when I hold the brakes?

Smart Brake Hold pauses the countdown while the brakes are applied and resumes it when they are released.

Which front marker light styles are offered?

The listed choices are sequential X-LITE DRL or standard 3/4-inch front marker lights.

Why XTC Power Products

XTC uses a small solid-state control box and a modular, vehicle-specific harness design for the ATS turn signal system.

Add Self-Canceling Signals to Your KRX 1000

Choose your XTC KRX 1000 turn signal kit at Dunes 2 Dezert SXS.