XTC 8 Switch Power Control System with Micro Switch Pad

Controlling multiple UTV accessories with separate switches can consume dash space and require additional mounting holes or brackets. Listed for: UTV and off-road vehicles using OE-style rocker switches; UTV, truck, Jeep, boat, tractor and RV applications. Fitment is not guaranteed on unlisted applications. The XTC power control system puts eight buttons in one rocker-switch location. Relay-controlled circuits feed accessories through a barrier strip, and an internal jumper selects keyed or full-time circuit power.

Key Features

• Eight-button micro switch pad occupies one rocker-switch location
• Two 30-amp, two 25-amp and four 20-amp relay-controlled circuits
• Internal fuse protection for each circuit and a 125-amp main power-line fuse
• Color-coded barrier-strip wires correspond to the fuse box
• Blue ignition backlight changes to red on an activated button
• Internal jumper selects keyed or full-time circuit power
• 4 AWG power and ground cables

Built To Solve: UTV Accessory Control Without Eight Dash Switches

• Control eight circuits from a pad occupying one rocker-switch location.
• Connect accessories at barrier-strip screw points instead of leaving bundles of excess wire under the hood.
• Match each barrier-strip wire color to the fuse box when adding connections or troubleshooting.
• Select keyed operation or circuit power regardless of key position with the internal jumper.

Best For: UTV and Off-Road Builders Wiring Accessories

• UTV builders using OE-style rocker-switch mounting locations
• Off-road vehicle owners controlling several accessories from limited dash space
• Truck and Jeep owners looking for an auxiliary switch panel
• Builders who prefer barrier-strip connections for future accessory changes

Specifications

• Circuit ratings: Two 30-amp, two 25-amp and four 20-amp circuits
• Main fuse: 125 amp
• Power and ground cable size: 4 AWG
• Switch pad size: One standard rocker-switch location
• Button illumination: Blue with ignition on; red when the circuit is activated
• Manufacturer part numbers: PCS-81

What's in the Box

• 4 AWG power and ground cables

Fitment

• UTV and off-road vehicles using OE-style rocker switches
• UTV, truck, Jeep, boat, tractor and RV applications

Fitment is based on current product data for this part and is not guaranteed on unlisted applications. If you don't see your exact setup, contact us and we'll confirm fitment before you order.

FAQ

Does the micro switch pad require extra mounting brackets or holes?

The pad occupies one rocker-switch location, avoiding the additional brackets and holes associated with a traditional eight-gang switch pad.

How do accessories connect to the system?

Accessories connect at the barrier strip. Its screw-point wires are color-coded to correspond with the fuse box.

How should I choose between keyed and full-time power?

Choose keyed mode if circuits should operate only with the key on. Choose full-time mode if they should work regardless of key position.

How many circuits are rated at 30 amps?

Two circuits are rated at 30 amps. The other six are rated at 25 or 20 amps.

Will the circuits work with the key off in keyed mode?

No. In keyed mode, the circuits work only when the key is on.

Why XTC Power Products

XTC uses an eight-button pad that occupies one rocker-switch location, paired with a color-coded barrier strip for accessory connections.

Wire UTV Accessories with the XTC Power Control System

Choose the XTC eight-switch power control system for compact accessory control and accessible circuit connections.