On a Wildcat XX the dust that bothers you most is your own, pulled forward through the open back of the cage.
This UTV Zilla rear window closes that opening with 3/16" tinted polycarbonate, thick enough to take what the rear tires throw at it rather than flexing every time you get on the throttle.
It hangs on anodized billet clamps with stainless bolts, and a rubber lower seal protects the plastics underneath and keeps the panel from rattling. 3D CAD designed and CNC machined so it follows the cage rather than being forced into place.
Key Features
- 3/16" thick tinted polycarbonate construction
- Anodized billet clamps with stainless steel bolts
- Rubber lower seal protects the plastics and prevents rattles
- 3D CAD designed and CNC machined for a precise fit
- Tinted for privacy and glare reduction
- Designed and made in the USA
Built To Solve: Your Own Trail Dust Filling The Wildcat XX Cab
- An open rear cage lets the dust your own machine throws roll straight forward into the cab
- Riding in a group means eating everyone else's dust as well as your own
- Thin rear panels flex and drum under what the rear tires throw at them
- Cold-weather riding with an open back means wind through the cab whatever is on the front
- A bare panel edge sitting on bodywork rattles and wears the plastics
Best For: Wildcat XX Machines Ridden In Dust Or In A Group
- Riders who already run a front windshield and still have dust in the cab
- Group and convoy riders eating dust from behind
- Cold-weather riders closing the cab off at both ends
- Tracker XTR 1000 owners, which is the same machine under a different badge
- Pairs with: the UTV Zilla Wildcat XX vented glass windshield or full polycarbonate windshield to close the cab at both ends
Specifications
- Material: 3/16" tinted polycarbonate
- Construction: 3D CAD designed, CNC machined
- Mounting: anodized billet clamps with stainless steel bolts
- Lower edge: rubber seal
- Origin: designed and made in the USA
- Manufacturer note: polycarbonate can and will scratch
- Manufacturer Part Number: ZL-WCXX-RR-T
Fitment
Fits the Arctic Cat Wildcat XX. UTV Zilla also lists this for the Tracker XTR 1000, which is the same machine sold under the Tracker badge.
UTV Zilla publishes no model-year range for this rear window, so we are not claiming one. Ask us if you want your year confirmed before ordering and we will check with the manufacturer.
Polycarbonate panels can interfere with aftermarket roofs, windshields, cab enclosures, stereos and mirrors. Check clearance against anything already mounted to the rear of your cage.
Installation instructions: install guide (PDF).
FAQ
Will this actually cut the dust in my cab?
It closes the opening most of it comes through. On a Wildcat XX the dust that reaches you is largely your own, pulled forward through the open rear of the cage, so sealing the back makes a bigger difference than most riders expect. Pair it with a front windshield for a genuinely clean cab.
Why billet clamps rather than straps?
A rear panel sits where the rear tires throw rocks and grit at it, so it needs a more positive mount than a strap. Anodized billet clamps with stainless bolts hold it solidly and will not corrode.
Is 3/16 inch thick enough back there?
Yes, and that is why polycarbonate is used rather than glass in this position. Polycarbonate takes impact far better than glass, which matters for a panel in the firing line of the rear tires. The trade is that it scratches more easily, so rinse grit off before wiping.
What model years does it fit?
UTV Zilla publishes no year range for this rear window, listing it for the Wildcat XX and Tracker XTR 1000. We would rather tell you that than guess. Contact us if you need your specific year confirmed.
Does the tint make it hard to see behind?
It darkens the view rather than blocking it, which is what most riders want back there — it cuts glare from a following machine's lights and adds privacy without making the mirror useless.
Will it rattle?
There is a rubber seal along the lower edge whose job is exactly that: it protects the plastics underneath and stops the panel buzzing against the bodywork.
Why UTV Zilla
UTV Zilla designs and CNC machines every panel from a 3D CAD model, specifies 3/16" polycarbonate where thinner sheet would flex, and mounts it on anodized billet clamps with stainless hardware rather than the cheapest fastener available. Designed and made in the USA.
Close Off The Back Of Your Wildcat XX
Most riders adding a rear window are already running something up front, so if your cab is still open there, pair this with the Wildcat XX vented glass windshield or the full polycarbonate windshield depending on budget. Add a roof and the cab is closed on all sides. If you need a model year confirmed before ordering, ask us — UTV Zilla does not publish a range for this panel and we will check rather than guess.
