2017-2026 Can-Am Maverick X3 6-Switch Power Control System | XTC Power

The XTC PCS-64 6-Switch Power Control System turns your Can-Am Maverick X3 into a fully wired accessory platform. It uses a vehicle-specific power connector and rocker switch harness that drops into the factory pre-cut switch positions, so you can run whips, light bars, rock lights, and a winch from one clean, fused source. Relayed high-power circuits and direct-wire outputs give you six controlled accessories without cutting or splicing factory wiring.

Key Features

• Six switched circuits: one 30A and three 20A high-power relayed, plus two 10A direct-wire circuits for rock lights, whips, and low-draw accessories
• Integrated fuse block with an individual fuse per switch and blown-fuse LED fault indicators
• 50A main circuit breaker at the battery included
• Heavy-duty 8GA power cable and a pre-wired barrier strip for clean, organized runs
• Plug-and-play Molex connectors, so no cutting or crimping of factory wiring
• Fits factory switch openings in the center console and dash; bottom-row lighting powers only with ignition on

Built To Solve: Messy Can-Am X3 Accessory Wiring

• Eliminates spliced, unfused add-on wiring that blows fuses and drains the battery
• Takes the guesswork out of relays and circuit sizing: high-draw items get relayed 20-30A circuits, low-draw items get direct 10A outputs
• Ends cluttered under-dash wiring with a pre-wired barrier strip and labeled fused outputs
• Blown-fuse LED indicators make trailside troubleshooting fast

Best For: Can-Am X3 and Maverick R Owners Adding Lights and Winches

• Dune and desert riders running whips, chase lights, and light bars
• Builders wiring a winch, rock lights, and accessory power in one pass
• DIY installers who want factory-style plug-and-play instead of cut-and-splice
• Owners who plan to expand accessories over time and want spare switched circuits

Specifications

• Circuits: 1 x 30A relayed, 3 x 20A relayed, 2 x 10A direct-wire
• Main protection: 50A circuit breaker at the battery
• Power cable: 8GA
• Fuse block: individual fuse per switch with blown-fuse LED indicators
• Connectors: plug-and-play Molex; vehicle-specific harness
• Weight: 58 oz
• Dimensions: 11.25 x 8.75 x 4.25 in
• Origin: Made in the USA
• Rocker switches optional (dual-lit rockers with replaceable icon legends included on the switch option)
• Manufacturer Part Number: PCS-64-MAV-NS (no switches) / PCS-64-MAV (with switches)

Fitment

Engineered for 2017-2026 Can-Am Maverick X3 and Maverick X3 MAX, and 2024-2026 Can-Am Maverick R and Maverick R MAX, covering both 2- and 4-seat models. It uses a vehicle-specific harness that fits the factory pre-cut rocker switch positions. Fitment is not guaranteed on applications not listed here, so confirm your model year and trim before ordering.

FAQ

How many accessories can this 6-switch power system control?

Six. You get one 30A and three 20A high-power relayed circuits for items like light bars and winches, plus two 10A direct-wire circuits for low-draw accessories such as rock lights and whips.

Do I need to cut or splice my Can-Am's factory wiring?

No. The system uses plug-and-play Molex connectors and a vehicle-specific harness that fits the factory pre-cut rocker switch positions, so installation requires no cutting or crimping.

Does it fit both 2- and 4-seat Maverick X3 and Maverick R models?

Yes. It is engineered for 2017+ Can-Am Maverick X3 and 2024+ Maverick R in both 2- and 4-seat (MAX) configurations. Confirm your exact model year and trim before ordering.

Are rocker switches included?

Switches are optional. The base no-switch option ships without switches for custom laser-etched rockers; the included-switch option adds basic dual-lit rocker switches with replaceable icon legends.

Is the fuse block protected and easy to troubleshoot?

Each switch runs on its own individual fuse with a blown-fuse LED indicator, and a 50A main circuit breaker is installed at the battery for whole-system protection.

How is this different from the 8-switch PCS-81 system?

This system controls six circuits using a vehicle-specific X3 harness in the factory switch locations. The PCS-81 adds two more circuits with a compact micro switch pad and is a good step up when you need eight controlled accessories.

Why XTC Power Products

XTC Power Products builds vehicle-specific, plug-and-play electrical systems designed to integrate with factory switch locations and wiring. This power control system is made in the USA and engineered for clean, expandable accessory power without hacking into your Can-Am's harness.

Complete Your Can-Am X3 Accessory Power Setup

Pair this power control system with a switch harness extension for flexible mounting, add Deutsch 2-pin power leads to run your lights and whips, and confirm your Maverick X3 or Maverick R model year and switch configuration before ordering. Need eight circuits instead of six? Step up to the PCS-81. Check fitment and add the accessory wiring you need to finish the install in one pass.