Plastic roofs get a bad name because most of them go chalky and brittle after a couple of summers.
This one is cut from 1/4" high-density plastic that UTV Zilla rates as both water and UV proof, so it is the thickness and the material doing the work rather than a thin sheet with a coating on it.
It is 3D CAD designed and CNC machined, picks up ten mounting points through rubber-coated cage clamps, and arrives with the installation instructions and every piece of hardware in the box.
Key Features
- 1/4" thick high-density plastic, water and UV proof
- 3D CAD designed and CNC machined for a precise fit
- Includes installation instructions and all needed hardware
- Ten mounting points secure the roof to the roll cage
- Rubber-coated clamps attach to the cage tubes
- Black stainless steel bolts and washers that will not rust
- Designed and made in the USA
Built To Solve: Sun, Rain And Brittle Plastic On A Wildcat XX
- Thin plastic roofs go chalky and brittle after a season or two in desert sun
- An open cage gives no shelter from either sun or rain
- Roofs that ship without hardware mean a trip to the hardware store before you can fit one
- Panels with few mounting points drum and flex at speed
- Plain steel bolts rust and streak the panel
Best For: Wildcat XX Owners Who Want Solid Cover That Lasts
- Riders who want full shade rather than a tinted panel that passes light
- Anyone whose last plastic roof went brittle and cracked
- Riders who want the hardware and instructions in the box
- Tracker XTR 1000 owners, which is the same machine under a different badge
- Consider instead: the UTV Zilla tinted polycarbonate roof if you want light through the panel, or the aluminum roof if you want metal
Specifications
- Material: 1/4" high-density plastic, water and UV proof
- Construction: 3D CAD designed, CNC machined
- Mounting: ten points, rubber-coated clamps to the cage tubes
- Hardware: black stainless steel bolts and washers, included
- Included: installation instructions and all needed hardware
- Origin: designed and made in the USA
- Manufacturer Part Number: ZL-WCXX-RF-HD
Fitment
Fits the Arctic Cat Wildcat XX, 2018 through 2023. UTV Zilla also lists this for the Tracker XTR 1000, which is the same machine sold under the Tracker badge.
This is a Wildcat XX roof. The Wildcat Trail and Wildcat Sport use different panels and are not covered here.
Plastic roofs can interfere with aftermarket windshields, rear windows, cab enclosures, stereos and mirrors. Check clearance against anything already on your cage before ordering.
Installation instructions: roof install guide (PDF).
FAQ
How is this different from the polycarbonate roof?
Thickness and light. This one is 1/4" high-density plastic and opaque, so the cab is fully shaded. The polycarbonate roof is 3/16" and tinted, so it cuts glare while still letting light through. Both use the same ten mounting points and the same install sheet.
Will it go brittle in desert sun?
UTV Zilla rates the material as both water and UV proof, which is the specific failure mode cheap plastic roofs have. No panel is immortal in desert sun, but this is the material chosen to resist it rather than a thin sheet that will not.
Does it come with hardware?
Yes. The installation instructions and all the needed hardware are in the box, including black stainless bolts and washers rather than plain steel.
Does it fit the Tracker XTR 1000?
Yes. The Tracker XTR 1000 is the Wildcat XX under the Tracker badge, and UTV Zilla lists it in the fitment.
Why does this roof list 2018-2023 when the polycarbonate one says 2018 and newer?
That is how UTV Zilla lists them. The two roofs carry different stated ranges on the manufacturer's own pages, so we have reproduced each as published rather than assuming they match. If your machine is a 2024 or newer Wildcat XX, check with us before ordering.
Will it work with my existing windshield?
Usually, but check. UTV Zilla flags that plastic products may not fit alongside other aftermarket windshields, rear windows, cab enclosures, stereos and mirrors. If you already have something mounted to the front of the cage, measure before ordering.
Why UTV Zilla
UTV Zilla designs and CNC machines every panel from a 3D CAD model, specifies material by what actually survives desert sun rather than by what is cheapest, and ships the hardware and instructions in the box with black stainless fasteners and rubber-coated cage clamps. Designed and made in the USA.
Put A Solid Roof On Your Wildcat XX
Confirm your Wildcat XX falls in the 2018 to 2023 range UTV Zilla lists for this roof, or that you are on a Tracker XTR 1000. If you already run an aftermarket windshield or rear window, check clearance first. Riders closing in the whole cab usually add the Wildcat XX glass windshield and the tinted rear window alongside it. If you want light through the panel instead, the tinted polycarbonate roof is the alternative.
