Polaris RZR Pro R / Turbo R High Clearance Radius Rod Set | DRT Motorsports
Shipping calculated at checkout
Low stock
The Polaris RZR Pro R / Turbo R Billet Aluminum High Clearance Radius Rod Set from DRT Motorsports is designed to obtain maximum clearance, reduce weight, increase strength, and add adjustability to your radius rods in a stylish package. Engineered for 2020+ Polaris RZR Pro R, Pro R 4, Turbo R, and Turbo R 4 (2-door and 4-door), this kit replaces OEM radius rods with race-grade billet aluminum links engineered for the Pro R / Turbo R chassis.
Manufactured in the USA on state-of-the-art CNC equipment from aerospace-grade 6061-T6 aluminum. Lower high-clearance rods feature a press-fit wide 3/4" spherical bearing with stainless steel spiral locking rings that secure the rod to the chassis side of the vehicle. On the hub side, 3/4" chromoly steel Teflon-lined rod ends let you dial in length to keep axles in correct operational limits. Upper rods feature the same 3/4" rod ends in a right/left setup, making them fully adjustable and providing for quick camber adjustability. 303 stainless steel misalignment spacers for corrosion resistance and long service life.
Key Features
- Vehicle-specific fit — 2020+ Polaris RZR Pro R, Pro R 4, Turbo R, Turbo R 4 (all models, 2-door and 4-door)
- CNC-machined aerospace-grade 6061-T6 aluminum construction
- Mil-spec anodized finish
- Hex bar geometry for wrench lock at rod ends
- Lower rods: 3/4" press-fit Teflon-lined wide spherical bearings with stainless spiral locking rings
- Upper rods: 3/4" chromoly steel Teflon-lined rod ends, left/right adjustable
- 303 stainless steel misalignment spacers
- Maximum clearance for technical terrain
- Reduced weight vs. OEM with significantly increased strength
- Machined pockets with laser-engraved DRT branding
- PATENT PENDING design exclusive to DRT Motorsports
Specifications
- Application: 2020+ Polaris RZR Pro R / Pro R 4 / Turbo R / Turbo R 4
- Material: Aerospace-grade 6061-T6 aluminum, hex bar geometry
- Finish: Mil-spec anodize
- Upper rod ends: 3/4" chromoly steel, Teflon-lined, left/right adjustable
- Lower rod bearings: Press-fit 3/4" Teflon-lined wide spherical with stainless steel spiral locking rings
- Spacers: 303 stainless steel misalignment spacers
- Branding: Laser-engraved DRT logos in machined pockets
- Installation: Direct bolt-on — verify jam nuts tight with thread locker; paint check recommended
- Status: Patent Pending
Fitment
Engineered for 2020+ Polaris RZR Pro R, Pro R 4, Turbo R, and Turbo R 4 (all models, 2-door and 4-door). Direct OEM-replacement for factory radius rods on Pro R / Turbo R chassis.
FAQ
Does it fit both Pro R and Turbo R?
Yes. The kit fits all 2020+ Pro R and Turbo R configurations in both 2-door and 4-door (Pro R 4 / Turbo R 4) variants — same suspension geometry across these platforms.
What's the difference between upper and lower rods?
Lower high-clearance rods use 3/4" press-fit Teflon-lined spherical bearings with stainless spiral locking rings for maximum load resistance and chassis-side security. Upper rods use 3/4" chromoly steel Teflon-lined rod ends in left/right configuration for camber adjustability.
Will it fit my Pro XP or XP 1000?
No. This kit is sized for the Pro R / Turbo R chassis. The Pro XP and 2024+ XP 1000 use different chassis and require platform-specific radius rod sets.
Why upgrade from OEM radius rods?
OEM radius rods can bend or fail under aggressive Pro R / Turbo R use. The DRT billet aluminum links are significantly stronger, lighter, fully adjustable, and use lower spherical bearings with spiral locks for race-grade reliability.
What's the installation tip?
Verify jam nuts are tight and installed with thread locker. Paint check is recommended for visual movement verification. Inspect jam nuts before each ride to ensure tightness and security.
Are the rod ends adjustable?
Upper rods are fully adjustable with left/right-hand rod ends for camber tuning. Lower rods use press-fit spherical bearings (non-adjustable on the chassis side) but include hub-side adjustability through the rod end.
Why DRT Motorsports
DRT Motorsports engineers Polaris RZR Pro R and Turbo R-specific suspension components that replace OEM weak points with race-grade billet aluminum. From aerospace-grade 6061-T6 construction and 3/4" chromoly Teflon-lined rod ends to wide spherical bearings with stainless spiral locks, mil-spec anodize, and laser-engraved branding, every DRT high-clearance radius rod set upgrades suspension strength, clearance, and adjustability.
CTA
Strengthen your Pro R / Turbo R rear suspension and maximize clearance. Order the DRT Motorsports High Clearance Radius Rod Set from Dunes 2 Dezert SXS — your authorized DRT Motorsports dealer.
