Description

Rigid Adapt XP Extreme LED Light

Description

The RIGID Adapt XP has a signature look unlike any other off-road LED light on the market. Own The Night with RIGID’s Adapt XP. Feature packed with the most advanced patented technology, this light features a high-strength aluminum heat sink and an impact-resistant polycarbonate lens.

Adaptive Response

On the inside, the Adapt XP contains cutting-edge technology. The Adapt XP takes off-road lighting performance to a whole new level with two layers of adaptive response to your vehicle and driving conditions.

The first layer of adaptive response is RIGID’s Active Power Management (APM) system which continuously monitors input voltage to determine the status of the vehicle’s electrical system. If the voltage is stable, the Adapt XP will continue to utilize all available power to give you the most output possible. If the available voltage to the light begins to drop due to insufficient power, RIGID’s APM system will gradually reduce the light’s power consumption until the vehicle’s voltage stabilizes.

The second layer of adaptive response featured in the Adapt XP is RIGID’s proven Active View Technology. This technology uses an internal GPS module to determine the vehicle’s speed, allowing the Adapt to distribute all available power among three unique optic zones properly. Utilizing the three optic zones allows the Active View Technology to create the ideal beam pattern to suit the driver’s needs. As the vehicle’s speed changes, power is dynamically routed through various optic zones utilizing scene optics for low speed, driving optics for moderate speed, and spot optics for high-speed driving.

Power is transferred gradually between optic zones allowing for a seamless transition between beam patterns and providing much brighter and more natural-looking light, and reducing eye fatigue. As an extra feature, the Adapt XP features a Magnetic Reed Power Clip for additional customization. Leaving the clip in place limits the light to consuming a maximum of 2.7 amps for the single unit and 2.5 amps per light for the pair when all zones are activated.

Output is 40 watts with the switch in place. When the switch is removed, the single light will consume up to 6.5 amps, and the pair will consume up to 5.7 amps per light when all zones are activated. The single light output with the switch removed is 90 watts, and the output for the pair is 80 watts.

Wire harness & switch are sold separately; for the pair, use harness #36360. For the single, use harness #40187. Whether running a single battery or have additional power available, the Adapt XP will give you the light you need, when you need it, where you need it.

Features

• 3 Optic Zones – Scene, Driving, Spot
• Seamless Beam Transition
• Slow, Moderate & High-Speed Beam Patterns
• Two Layers of Adaptive Response
• Active Power Managementâ„¢ System – Power Capacity Sensing
• Active View Technologyâ„¢ – Internal GPS Module
• Use In Adapt Mode Or All On
• 9-32 VDC
• Impact Resistant Polycarbonate Lens
• Durable UV Polyester Powder Coat
• Universal Fit
• Operating Temp -22F to +158F/-30C to +70C
• Alloy Housing and Heatsink
• Patented Optics
• 50,000 Hour+ LED Lifespan
• Limited Lifetime Warranty
• Off-Road Use Only
• Wiring Harness Sold Separate, #40187