Description
Factory UTV CanAm X3 Max Skid Plate
Description
Can-Am Maverick X3 Max UHMW Skid Plate. Fits: 64″ & 72″ wide 4 seat “MAX” models.
Factory UTV’s UHMW Skid Plates are the gold standard for UTV protection systems. OEM skid plates simply do not protect the underside of your UTV. The Best Full-Coverage UHMW protection for your X3 MAX.
Added Protection
Factory UTV’s UHMW Skid Plates are the gold standard for UTV protection systems. OEM skid plates simply do not satisfactorily protect the underside of your UTV under normal off-road operation. The Can Am X3 OEM protection falls seriously short in a couple of areas. Can-Am uses HMW, which has 1/10th the impact strength compared to the UHMW used for Factory UTV’s Armor. This is an important distinction on a machine as big and fast as the X3. The X3’s Clutch Cover is extremely vulnerable to damage from below with the OEM protection.
Factory UTV Armor addresses the clutch cover vulnerability with coverage that extends out and around the cover to protect it from below. We’ve also added an X-Brace option under the engine/trans area of the X3. “ ½” or 3/8” UHMW rear skid with a 1/8” inch 6061 high strength aluminum backing plate, X brace aluminum backing plate is installed in between UHMW skid and chassis frame and limits the amount of impact absorbing skid plate flex in the rear vital areas to further protect the transmission and clutch cover housing, UHMW rear skid plate and aluminum x brace works with our UHMW skid package as well as with the stock main skid plate.
Play Hard
If you’re going to play hard in your X3, you’ll need the added X-Brace protection. The X3 engine/trans is precariously close to the skid plate on an X3. We’ve also added a front differential skid plate covering an area left bar by the OEM. This diff plate is molded to conform with the X3 in that area. These are the same X3 UHMW Armor products you’ll see on the Can Am X3’s of top Can Am factory racers like Kyle Chaney, Marc Burnett, and Monster Matt Burroughs to name just a few. They depend on Factory UTV UHMW Armor to get them to the finish line under the most demanding of race conditions.
X-Brace:
- 6061st aluminum X brace reinforcement plate,
- Reinforces rear skid plate to limit impact flexing in vital areas.
Reviews
There are no reviews yet.